HI,
Does anybody have configure DPON on a 10K ?
I try to make it work and when I apply the command: cable upstream dpon and do a shut/no shut, my modem disappear and wont get back.
IOS; ubr10k2-k9p6u2-mz.122-33.SCF.bin
My config is:
interface Cable6/1/4
downstream Integrated-Cable 6/1/4 rf-channel 0-3 upstream 0
no cable mtc-mode
no cable mrc-mode
cable service type 1
no cable packet-cache
cable max-hosts 5
cable bundle 1
cable upstream max-ports 4
cable upstream dpon
cable upstream bonding-group 119
upstream 0
upstream 1
upstream 2
upstream 3
attributes A0000000
cable upstream ranging-init-technique 2
cable upstream 0 connector 16
cable upstream 0 frequency 20400000
cable upstream 0 channel-width 3200000 3200000
cable upstream 0 description DPON-TEST
cable upstream 0 docsis-mode atdma
cable upstream 0 minislot-size 2
cable upstream 0 range-backoff 3 6
cable upstream 0 modulation-profile 221
no cable upstream 0 shutdown
controller Integrated-Cable 6/1/4
rf-channel 0 cable downstream channel-id 89
rf-channel 0 frequency 603000000 annex B modulation 256qam interleave 32
rf-channel 0 rf-power 52.0
no rf-channel 0 rf-shutdown
rf-channel 1 cable downstream channel-id 90
rf-channel 1 frequency 609000000 annex B modulation 256qam interleave 32
rf-channel 1 rf-power 52.0
no rf-channel 1 rf-shutdown
rf-channel 2 cable downstream channel-id 91
rf-channel 2 frequency 615000000 annex B modulation 256qam interleave 32
rf-channel 2 rf-power 52.0
no rf-channel 2 rf-shutdown
rf-channel 3 cable downstream channel-id 92
rf-channel 3 frequency 621000000 annex B modulation 256qam interleave 32
rf-channel 3 rf-power 52.0
no rf-channel 3 rf-shutdown
cable fiber-node 19
downstream Integrated-Cable 6/1/4 rf-channel 0-3
upstream Cable 6/1 connector 16-19
-----------------------------
log event since I activate dpon
SLOT 6/0: : MAP Timer Skew 16 ms
SLOT 6/1: MAP Timer Skew 108 ms
thanks in advance.