Docsis MIB Support | docsis.org

You are here

Docsis MIB Support

2 posts / 0 new
Last post
alextt
Docsis MIB Support

Hello does anyone know what is the oid for the following command "show cable modem docsis downstream channel utilization"?

Any help will be highly appreciated

mbowe
I use two different solutions

I use two different solutions for graphing downstream traffic

1) snmpget the traffic from IF-MIB::ifOutOctets table. This gives me my traffic counts for interface cable / integrated-cable / wideband-cable.

2) bit of a beta/hack, I snmpget (must be snmpv2) counters from CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelMpegPkts (.1.3.6.1.4.1.9.9.479.1.1.1.6)

oh and for other cases (not this one) where I cannot find a suitable mib, I would write a script that telnets to the CMTS and scrapes the CLI output. You can then serve this as a snmp counter by putting the script into the exec section of a linux snmpd.conf

Log in or register to post comments