config file command for docsis 3.0 | docsis.org

You are here

config file command for docsis 3.0

6 posts / 0 new
Last post
flyingdida
config file command for docsis 3.0

is there a command can put into config file to make docsis 3.0 modem into factory mode?
I am working on motorola cisco and arris modems.

I can not find any info around for docsis 3.0

husamaga
i think that you need to read

i think that you need to read the MIB's for these modems, and find if there is a snmp object for somwthing like that.
what series of modems you use?..

flyingdida
so far i am working on

so far i am working on motorola model. sb6120 sb6121 sb6141 sbg6580

i can find OID for disable factory mode. but no OID for enable factory mode

husamaga
please write the disable

please write the disable factory mode here. i will check the enable for you

flyingdida
disable the factory MIB by

disable the factory MIB by setting the OID

1.3.6.1.4.1.1166.1.19.4.29.0 to int 1

Example: snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.1166.1.19.4.29.0 i

xsimio
For Arris modems you cannot

For Arris modems you cannot enable FACTORY MODE by yourself.

Log in or register to post comments