CMTS in a hardware QA setup |

You are here

CMTS in a hardware QA setup

1 post / 0 new
CMTS in a hardware QA setup

I am looking to put a CMTS in place to test against some wireless cable modems in an automated testbed. What I am looking for is a small CMTS with a web interface that will allow me to set it up as a bridge so the cable modems receive their DHCP info from ethernet network. I would probably setup between 4 to 10 cable modems to test against.

What CMTS would be best for this setup?
Can a CMTS be put in a bridge mode as I described and work on an IP network? (I have accomplished this setup with an IP-DSLAM and DSL modems successfully...)

Thanks for your time!