Cisco UBR 7111 Issue

the Cmts is loading with (boot)

System Bootstrap, Version 12.0(5r)XE2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.

R5K CPU
C7100 platform with 131072 Kbytes of main memory

Self decompressing the image : ######################################################################################################################################################################################################################################################################################################################################### [OK]

%PA-3-PACREATE: Unable to create driver for Port Adaptor type 586 in bay 1
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
Self decompressing the image : ######################################################################################################################################################################################################################################################################################################################################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS (tm) EGR Software (UBR7100-BOOT-M), Version 12.1(7)EC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 12-Jun-01 13:19 by ninahung
Image text-base: 0x60008950, data-base: 0x60892000

cisco uBR7111 (EGR) processor (revision A) with 122880K/73728K bytes of memory.
Processor board ID 27234878
R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
125K bytes of non-volatile configuration memory.

8192K bytes of Flash internal SIMM (Sector size 256K).

Press RETURN to get started!

00:00:09: %PA-3-PACREATE: Unable to create driver for Port Adaptor type 586 in bay 1
00:00:20: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:20: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
00:00:20: %SYS-5-CONFIG_I: Configured from memory by console
00:00:20: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) EGR Software (UBR7100-BOOT-M), Version 12.1(7)EC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 12-Jun-01 13:19 by ninahung
00:00:22: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
00:00:22: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
Router(boot)>
Router(boot)>
Router(boot)>

what does this mean ? is it a hardware issue