Hi all,
I configured, according to the manual, the rules, policies and loadbalance-groups all the parameters so that the CMTS did the balance but it can't. i need your help to determinate what's happen!
add the configuration
cable loadbalance-rule RULE_ENABLE enable snmp-index 2
cable loadbalance-rule RULE_DS ds-reg modem-count-thresh 5 snmp-index 1
cable loadbalance-rule RULE_US us-reg modem-count-thresh 5 snmp-index 2
!
!
cable loadbalance-policy Poli_DS snmp-index 2
policy rule RULE_DS snmp-index 1
policy rule RULE_ENABLE snmp-index 2
!
cable loadbalance-policy Poli_US snmp-index 3
policy rule RULE_US snmp-index 1
policy rule RULE_ENABLE snmp-index 2
!
!
cable loadbalance-group Bonding_0_DS snmp-index 2
load-balancing init-tech 1
load-balancing policy Poli_DS
load-balancing mode enabled
!
cable loadbalance-group Bonding_0_US snmp-index 3
load-balancing init-tech 1
load-balancing policy Poli_US
load-balancing mode enabled
cable downstream port 11/0
cable downstream interleave-depth 32
cable downstream power-level 440
cable downstream 0 frequency 585000000
cable downstream 0 loadbalance-group Bonding_0_DS
no cable downstream 0 shutdown
cable downstream 1 loadbalance-group Bonding_0_DS
no cable downstream 1 shutdown
cable downstream 2 loadbalance-group Bonding_0_DS
no cable downstream 2 shutdown
cable downstream 3 loadbalance-group Bonding_0_DS
no cable downstream 3 shutdown
no cable downstream shutdown
!
interface cable 0/0
load-interval 1
cable bundle 1
no ip address
no shutdown
cable bind downstream 0,1,11/0/0,11/0/1,11/0/2,11/0/3,11/1/0,11/1/1,11/1/2,11/1/3
cable downstream 0 interleave-depth 8
no cable downstream 0 shutdown
cable downstream 1 interleave-depth 8
cable downstream 1 shutdown
cable bind upstream 0,1,2,3,4,5,6,7
cable upstream 0/0 channel-type mtdma
cable upstream 0 frequency 39900000
cable upstream 0 pre-equalization
cable upstream 0/0 modulation-profile 115
cable upstream 0 loadbalance-group Bonding_0_US
no cable upstream 0 shutdown
no cable upstream 0/0 shutdown
Thanks for your time.
you have load balance as far as modem registration, not load or utilization. btw, your downstream interleaver on the 2x8 should the same as the tx32. config should look something like
cable utilization-interval 300
!
!
cable loadbalance-rule R1_enable enable snmp-index 1
cable loadbalance-rule R2_disable disable snmp-index 2
cable loadbalance-rule R4_us_count us-reg modem-count-thresh 5 snmp-index 4
cable loadbalance-rule R5_us_util us-util min 40 delta 10 stop 5 snmp-index 5
cable loadbalance-rule R6_ds_util ds-util min 50 delta 10 stop 5 snmp-index 6
!
!
cable loadbalance-policy P1_Bal snmp-index 1
policy rule R1_enable snmp-index 1
policy rule R6_ds_util snmp-index 5
!
cable loadbalance-policy P2_NoBal snmp-index 2
policy rule R2_disable snmp-index 1
!
!
cable loadbalance-group BG06 snmp-index 6
load-balancing init-tech 2
load-balancing policy P1_Bal
load-balancing mode enabled
!
cable loadbalance-group BG07 snmp-index 7
load-balancing init-tech 2
load-balancing policy P1_Bal
load-balancing mode enabled
!
cable loadbalance-group BG08 snmp-index 8
load-balancing init-tech 2
load-balancing policy P1_Bal
load-balancing mode enabled
!
cable loadbalance-group BG09 snmp-index 9
load-balancing init-tech 2
load-balancing policy P1_Bal
load-balancing mode enabled
Hello cmcaldas
Hoping this reply find you well guys on these times .
Below is my running configuration for the load balance.
If you could tell me if should i remove or add anything in the config as i am not sure if my config works.
-----LOAD BALANCE RUNNING CONFIG-----
cable utilization-interval 300
!
!
cable loadbalance-rule R1_enable enable snmp-index 1
cable loadbalance-rule R2_disable disable snmp-index 2
cable loadbalance-rule R4_us_count us-reg modem-count-thresh 5 snmp-index 4
cable loadbalance-rule R5_us_util us-util min 40 delta 10 stop 5 snmp-index 5
cable loadbalance-rule R6_ds_util ds-util min 50 delta 10 stop 5 snmp-index 6
!
!
cable loadbalance-policy P1_Bal snmp-index 1
policy rule R1_enable snmp-index 1
policy rule R6_ds_util snmp-index 5
!
cable loadbalance-policy P2_NoBal snmp-index 2
policy rule R2_disable snmp-index 1
!
!
cable loadbalance-group Node-Test snmp-index 101
load-balancing init-tech 2
load-balancing policy P1_Bal
load-balancing mode enabled
!
!
cable loadbalance-group Glbg-17 snmp-index 1 2/0
cable loadbalance-group SG-20 snmp-index 1 2/0
load-balancing mode enabled
!
cable loadbalance-group Glbg-18 snmp-index 2 2/0
cable loadbalance-group SG-21 snmp-index 2 2/0
load-balancing mode enabled
!
cable loadbalance-group Glbg-19 snmp-index 3 2/1
cable loadbalance-group SG-22 snmp-index 3 2/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-20 snmp-index 4 2/1
cable loadbalance-group SG-23 snmp-index 4 2/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-29 snmp-index 5 3/2
cable loadbalance-group SG-34 snmp-index 5 3/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-30 snmp-index 6 3/2
cable loadbalance-group SG-35 snmp-index 6 3/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-31 snmp-index 7 3/3
cable loadbalance-group SG-36 snmp-index 7 3/3
load-balancing mode enabled
!
cable loadbalance-group Glbg-32 snmp-index 8 3/3
cable loadbalance-group SG-37 snmp-index 8 3/3
load-balancing mode enabled
!
cable loadbalance-group Glbg-1 snmp-index 9 0/0
cable loadbalance-group SG-00 snmp-index 9 0/0
load-balancing init-tech 2
load-balancing mode enabled
!
cable loadbalance-group Glbg-2 snmp-index 10 0/0
cable loadbalance-group SG-01 snmp-index 10 0/0
load-balancing init-tech 2
load-balancing mode enabled
!
cable loadbalance-group Glbg-3 snmp-index 11 0/1
cable loadbalance-group SG-02 snmp-index 11 0/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-4 snmp-index 12 0/1
cable loadbalance-group SG-03 snmp-index 12 0/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-5 snmp-index 13 0/2
cable loadbalance-group SG-04 snmp-index 13 0/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-6 snmp-index 14 0/2
cable loadbalance-group SG-05 snmp-index 14 0/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-7 snmp-index 15 0/3
cable loadbalance-group SG-06 snmp-index 15 0/3
load-balancing init-tech 2
load-balancing mode enabled
!
cable loadbalance-group Glbg-8 snmp-index 16 0/3
cable loadbalance-group SG-07 snmp-index 16 0/3
load-balancing init-tech 2
load-balancing mode enabled
!
cable loadbalance-group Glbg-9 snmp-index 17 1/0
cable loadbalance-group SG-10 snmp-index 17 1/0
load-balancing mode enabled
!
cable loadbalance-group Glbg-10 snmp-index 18 1/0
cable loadbalance-group SG-11 snmp-index 18 1/0
load-balancing mode enabled
!
cable loadbalance-group Glbg-11 snmp-index 19 1/1
cable loadbalance-group SG-12 snmp-index 19 1/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-12 snmp-index 20 1/1
cable loadbalance-group SG-13 snmp-index 20 1/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-13 snmp-index 21 1/2
cable loadbalance-group SG-14 snmp-index 21 1/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-14 snmp-index 22 1/2
cable loadbalance-group SG-15 snmp-index 22 1/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-15 snmp-index 23 1/3
cable loadbalance-group SG-16 snmp-index 23 1/3
load-balancing mode enabled
!
cable loadbalance-group Glbg-16 snmp-index 24 1/3
cable loadbalance-group SG-17 snmp-index 24 1/3
load-balancing mode enabled
!
cable loadbalance-group Glbg-21 snmp-index 25 2/2
cable loadbalance-group SG-24 snmp-index 25 2/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-22 snmp-index 26 2/2
cable loadbalance-group SG-25 snmp-index 26 2/2
load-balancing mode enabled
!
cable loadbalance-group Glbg-23 snmp-index 27 2/3
cable loadbalance-group SG-26 snmp-index 27 2/3
load-balancing mode enabled
!
cable loadbalance-group Glbg-24 snmp-index 28 2/3
cable loadbalance-group SG-27 snmp-index 28 2/3
load-balancing mode enabled
!
cable loadbalance-group Glbg-25 snmp-index 29 3/0
cable loadbalance-group SG-30 snmp-index 29 3/0
load-balancing mode enabled
!
cable loadbalance-group Glbg-26 snmp-index 30 3/0
cable loadbalance-group SG-31 snmp-index 30 3/0
load-balancing mode enabled
!
cable loadbalance-group Glbg-27 snmp-index 31 3/1
cable loadbalance-group SG-32 snmp-index 31 3/1
load-balancing mode enabled
!
cable loadbalance-group Glbg-28 snmp-index 32 3/1
cable loadbalance-group SG-33 snmp-index 32 3/1
load-balancing mode enabled
------END LOADBALANCE RUNNING CONFIG-------
------SHOW COMMANDS------
BSR64K:7A#show cable modem summary
Cable Total Reg Unreg Offline PS SpecGrp LbGrp Upstream
Interface Modem Modem Modem Modem Modem Name Name Description
0/0 U0C1 10 6 0 4 Node-A Glbg-1 Node-A
0/0 U0C2 7 4 1 2 Node-A Glbg-1 Node-A
0/0 U0C3 11 4 0 7 Node-A Glbg-1 Node-A
0/0 U0C4 12 4 1 7 Node-A Glbg-1 Node-A
0/0 U1C1 18 12 0 6 Node-B Glbg-2 Node-B
0/0 U1C2 13 12 0 1 Node-B Glbg-2 Node-B
0/0 U1C3 16 12 0 4 Node-B Glbg-2 Node-B
0/0 U1C4 35 13 0 22 Node-B Glbg-2 Node-B
0/0 B4014 204 203 0 0 1 N/A N/A N/A
0/0 B4114 281 280 0 0 1 N/A N/A N/A
BSR64K:7A#show cable loadbalance-group Glbg-1 0/0
Load Balance Group: Glbg-1
SnmpIdx: 9
Id: 9
MdCmSgId: 1
macIfIndex: 0x7f0000
Member channels: slot/port/channel
Cable 0/0/U1
Cable 0/0/U2
Cable 0/0/U3
Cable 0/0/U4
Cable 4/0/D0
Cable 4/0/D1
Cable 4/0/D2
Cable 4/0/D3
Cable 4/0/D4
Cable 4/0/D5
Cable 4/1/D0
Cable 4/1/D1
Cable 4/1/D2
Cable 4/1/D3
Cable 4/1/D4
Cable 4/1/D5
Cable 4/2/D0
Cable 4/2/D1
Cable 4/2/D2
Cable 4/2/D3
Cable 4/2/D4
Cable 4/2/D5
Cable 4/3/D0
Cable 4/3/D1
Cable 4/3/D2
Cable 4/3/D3
Cable 4/3/D4
Cable 4/3/D5
List of associated Fiber-Nodes:
SG-00
Configuration:
load-balance mode enabled
load-balance restricted false
load-balance svc-type-id not set
load-balance interval 15
load-balance empty-channel restricted true
load-balance initTech 2
Tech 0: 0
Tech 1: 1
Tech 2: 0
Tech 3: 0
Tech 4: 0
no load-balance policy assigned
BSR64K:7A#show interfaces cable downstream
Cable 0/0: Downstream 4/0/0 is up
9056480276 packet output, 11088373293097 bytes, 10299340 discarded
Avg downstream channel utilization : 39
119 total active modems
LB Group: Glbg-1, Glbg-2
MD-DS-SG-ID: 1
MD-CM-SG-ID: 1,2
Fiber-Node: SG-00,SG-01
BSR64K:7A#show cable loadbalance-group Node-Test
Load Balance Group: Node-Test
SnmpIdx: 101
Id: 33
MdCmSgId: 0
macIfIndex: 0xffffffff
Member channels: slot/port/channel
List of associated Fiber-Nodes:
Configuration:
load-balance mode enabled
load-balance restricted false
load-balance svc-type-id not set
load-balance interval 15
load-balance empty-channel restricted true
load-balance initTech 2
Tech 0: 0
Tech 1: 1
Tech 2: 0
Tech 3: 0
Tech 4: 0
load-balance policy P1_Bal
------END SHOW COMMANDS------
Will my loadbalance work on IF 0/0 and other IFs with this config ?
Kind Regards,
Endrit