Casa C100G - Upstream Dropped Packets | docsis.org

You are here

Casa C100G - Upstream Dropped Packets

5 posts / 0 new
Last post
maurbanski
Casa C100G - Upstream Dropped Packets

Hello,

hello we have a problem in this cmts, the cable loses pinging packets for ipv4 from cmts, and for ipv4 from the network,

We already changed the smms, the chassis, the sfp, the optical cord, and the problem continues.

thank's for your time.

stephen
Casa C100G - Upstream Dropped Packets

Maurbanski,

I had the same issue with my C1G, but with the downstream channels. I was getting around 5% dropped packets with Motorola surfboard modems only. Cisco and Netgear would work just fine. I was able to RMA the faulty CMTS and the issue was gone.

cmcaldas
side note

In some cases, the dropped packets is due to old modem firmware. I've seen this on Motorola, Ubee, Sagemcomm and others.
what's your upstream SNR?
what modulation profile are you using?

stephen
Casa C100G - Upstream Dropped Packets

This is being used on all channels

modulation-profile 3
request atdma qpsk off 64 0 16 338 0 16 fixed on 1 1536 qpsk0
initial atdma qpsk off 640 5 34 338 0 48 fixed on 1 1536 qpsk0
station atdma qpsk off 384 5 34 338 0 48 fixed on 1 1536 qpsk0
a-short atdma 64qam off 104 12 75 338 6 16 shortened on 1 1536 qpsk1
a-long atdma 64qam off 104 16 220 338 0 16 shortened on 1 1536 qpsk1

TheSlade#show upstream signal-quality
upstream channel signal noise
1/0.0/0 37.4
1/0.0/1 35.6
1/0.1/0 42.1
1/0.1/1 42.0

cmcaldas
try

I would try the following

modulation-profile 50
request atdma qpsk off 64 0 16 338 0 16 fixed on 1 1536 qpsk0
initial atdma qpsk off 640 5 34 338 0 48 fixed on 1 1536 qpsk0
station atdma qpsk off 384 5 34 338 0 48 fixed on 1 1536 qpsk0
a-short atdma 32qam off 104 8 75 338 6 16 shortened on 1 1536 qpsk1
a-long atdma 32qam off 104 10 220 338 0 16 shortened on 1 1536 qpsk1

interface upstream 11/5.0
frequency 26810000
channel-width 6400000
ingress-cancellation
logical-channel 0 description "Node-11"
logical-channel 0 profile 3 secondary-profile 50,51 (try different profiles to 32Qam and 16Qam)
logical-channel 0 minislot 4
logical-channel 0 data-backoff 3 6
logical-channel 0 ranging-backoff 3 6
logical-channel 0 pre-equalization auto-reset
no logical-channel 0 shutdown
logical-channel 1 profile 3
logical-channel 1 minislot 1
logical-channel 1 shutdown
no shutdown

Log in or register to post comments