| Attachment | Size |
|---|---|
 CMTS.txt | 44.26 KB |
Cisco-uBR10000#show cable modem
D
MAC Address IP Address I/F MAC Prim RxPwr Timing Num I
State Sid (dBmv) Offset CPE P
7896.84e7.a8ad 0.0.0.0 C5/0/0/U3 init(d) 7 0.00 1656 0 N
It was working before and am assuming i have deleted the Bundle or something.
Am very new to this and don't know what to do.
Please help
Hi,
You have two MAC domains.
One with IPv4 and one with IPv6.
The CM is with "init(d)" state is on the 5/0/0 interface, what is in the IPv4 MAC domain.
The other Ipv6 MAC domain is in the Bundle2.
But this this Ipv4 MAC domain has no bundle details. On the config there is no Bundle1 declared or assigned to the interfaces.
You should create it and assign to the neccesary interfaces. Like the "Bundle2".
Write me if you have any other question. If I can help, I will :-)
vatiacg.kefo@gmail.com
Thank you for your help.
I have created the bundle and it works now.