Any chance to get all downstream channels by remote-query?
At the moment, only the primary DS is shown.
It's a Cisco uBR10k 3G60 PRE4 with RFGW10 48QAM.
#sho cable modem wideband phy
MAC Address IP Address I/F MAC Chan Frq SNR Pwr
State Desc (MHZ) (db) (dBmV)
bc4d.fbaf.89a0 172.20.128.2 C5/0/0/UB w-online(pt) dsPri 474 43.30 0.50
dsSec 378 N/A N/A
dsSec 386 N/A N/A
dsSec 394 N/A N/A
dsSec 402 N/A N/A
dsSec 410 N/A N/A
dsSec 418 N/A N/A
dsSec 426 N/A N/A
dsSec 434 N/A N/A
dsSec 442 N/A N/A
dsSec 450 N/A N/A
dsSec 458 N/A N/A
dsSec 466 N/A N/A
dsSec 482 N/A N/A
dsSec 490 N/A N/A
dsSec 498 N/A N/A
us0 38 39.08 33.50
us1 44 39.11 33.50
us2 51 39.09 33.50
us3 58 38.94 33.50
Bit more background info....
This doesn't appear to be edgeQAM related
I tested on a ubr10k, UBR-MC20X20V, SPA-24XDS-SFP, Harmonic NSG9000
Some MAC domains on this chassis have DS from the 20x20, others have DS from the EQ
That command gives same partial results for both combinations
You mean even a setup without edgeqam does not show informations for slave channels?
I would expect that as DS Pwr and DS SNRare read from cm.
Could it be a limitation of the cisco ubr ios? I'm running SCH2a
Yes, even with no edgeqam, this data is not populated
So I guess the UBR is not snmp-polling all the individual DS stats from the CM