Necesito ayuda con un cmts motorola BSR1000, no puedo ingresar a la configuracion, se queda el prompt en "bsr1k_d>" le pongo enable y me pide password, al revisar la configuracion veo que tiene el usuario sysadmin con el mismo password, pero al poner ese password no me permite el ingreso, me dice que "Bad Passwords", espero y alguien me pueda ayudar, saludos.
BSR 1000R(tm) version 2.0.1.14.PRRU
Copyright (c) 2002 by Motorola.
Compiled Friday, August 28, 2009 12:43:31 PM EDT
MPC750 processor with 128MB memory.
Boot ROM : 00.03.01.TA
CPU : MPC750
Memory Size : 128 MB
Board Program ID : RD
Format Version : 9
Assembly Type : 14
PCA Number : PCA-0055-03
Board Revision : E
Board Serial Number : 050069949
Product Serial Number : 050070291
CPLD Revisions : 0x2A/0x14
Fabric FPGA Revision : 0x43
Hardware Acceleration : ON
The password must have been changed. power cycle the unit. when it says 5 or 10 seconds to interrupt the boot, hit the space bar.
type in the letter p this will print the bootup. note the value of the flag, should be 0x1000. type in the letter c this allows for changes. hit enter until it comes to the flag. type in 0x10 this will bypass the startup-config and boot with no config. go into the enable mode, copy start run will bring everything back. make changes to the password and save it. you may need to reload and stop the boot, type the letter p to confirm the flag is again at 0x1000. if it's not, change it to 0x1000 and you'll be all set
Carl
Thanks Carl.