Hello all
I am no so new, but new about CMTS
I like to know how can do to put run this uBR:
on the Slot0: exist a flash about 48mb, and it have images. but I dont know how recovery.
System Bootstrap, Version 12.0(5r)XE2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
R5K CPU
C7100 platform with 65536 Kbytes of main memory
open: file "c7100-atafslib-m" not found
open(): Open Error = -1
loadprog: error - on file open
cannot load the monitor library "disk0:%c7100-atafslib-m" from device: PCMCIA slot 0boot: cannot open "disk0:"
boot: cannot determine first file name on device "disk0:"
Thanks to all.
What files are on your Flash Card in Slot 0 ?
Hi - What files are on your flash card in Slot 0? There should be a file name on it, something similar to ... ubr7100-ik8s-mz.123-9a.BC9 . Let me know, ... lnorman@cablesight.com
Hello - Please look at the contents of your Flash Card in Slot 0. It should contain a IOS file, ...
something similar to, ubr7100-ik8s-mz.123-9a.BC9 . If not, ... do you have any IOS on your possession?
You should have a file (i.e.) ubr7100-ik8s-mz.123-9a.BC9.bin on your Flash Card in Slot 0, and have your bootvar set to boot from that location & file name.
You should have a file (i.e.) ubr7100-ik8s-mz.123-9a.BC9.bin on your Flash Card in Slot 0, and have your bootvar set to boot from that location & file name.
You should have a file (i.e.) on your Flash Card in Slot 0, and have your set to boot from that location & file name.
You should have a file (i.e.) ubr7100-ik8s-mz.123-9a.BC9.bin on your Flash Card in Slot 0, and have your bootvar set to boot from that location & file name.
Assuming you know Cisco IOS commands, ... look to see what files and images are on "slot0". You should have a file on there named similar to, ... "ubr7100-ik8s-mz.123-9a.BC9.bin". Then look at the "bootvar" to what is assigned to the router to boot from, ... it should be the same.