Setting up a Cisco uBr7246VXR

I have a small private RV resort we are working on. In 2006 we designed and built the TV side of the system, all underground cabling. Yes we kept the future in mind, using all 1 ghz passives, 2 way amps ect. Now that their wifi system is overloaded its time for a better alternative. To the point, we have everything ready to go but need assistance with the Cisco CMTS. I've decided on the Motorola 5000 surfboard as the only cm to be used in the system. But I have a startup config problem. Any advice would be greatly appreciated. This is our recently revised version yet to be loaded:

version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service udp-small-servers max-servers no-limit
!
hostname laha
!
logging queue-limit 100
enable secret 5 $1$tI1f$mDoCDKw81eCJCd9aUKZXw0
enable password laha1
!
clock timezone PDT -8
clock summer-time PDT recurring
clock calendar-valid
cable modulation-profile 10 request 0 16 0 8 qpsk scrambler 152 no-diff 64 fixed
uw16
cable modulation-profile 10 initial 5 34 0 48 qpsk scrambler 152 no-diff 128 fix
ed uw16
cable modulation-profile 10 station 5 34 0 48 qpsk scrambler 152 no-diff 128 fix
ed uw16
cable modulation-profile 10 short 5 76 7 8 16qam scrambler 152 no-diff 144 short
ened uw16
cable modulation-profile 10 long 10 220 0 8 16qam scrambler 152 no-diff 160 shor
tened uw16
cable qos profile 12
cable qos profile 12 tos-overwrite 0xFF 0x0
no cable qos permission create
no cable qos permission update
cable qos permission modems
cable time-server
!
cable config-file platinum.cm
service-class 1 max-upstream 128
service-class 1 guaranteed-upstream 10
service-class 1 max-downstream 10000
service-class 1 max-burst 1600
cpe max 10
timestamp
!
ip subnet-zero
ip tcp synwait-time 5
!
!
ip cef
ip cef accounting per-prefix
no ip domain lookup
dns-server 208.76.222.222
dns-server 208.76.220.220
no ip dhcp relay information check
!
ip dhcp pool cm-platinum
network 10.1.4.0 255.255.255.0
bootfile platinum.cm
next-server 10.1.4.1
default-router 10.1.4.1
option 7 ip 10.1.4.1
option 4 ip 10.1.4.1
option 2 hex ffff.8f80
domain-name sh
lease 7 0 10
!
ip dhcp pool pcs-c3
network 192.168.100.0 255.255.255.0
next-server 192.168.100.1
default-router 192.168.100.1
!
mpls ldp logging neighbor-changes
!
!
interface FastEthernet0/0
ip address 192.168.5.25 255.255.255.0
no ip route-cache cef
duplex full
!
interface Cable3/0
ip address 192.168.100.1 255.255.255.0 secondary
ip address 10.1.4.1 255.255.255.0
no ip route-cache cef
cable downstream annex B
cable downstream modulation 64qam
cable downstream interleave-depth 32
cable downstream frequency 337250000
cable downstream channel-id 0
cable upstream 0 frequency 37008000
cable upstream 0 power-level 0
cable upstream 0 channel-width 1600000
cable upstream 0 minislot-size 4
cable upstream 0 modulation-profile 1
cable upstream 0 s160-atp-workaround
no cable upstream 0 shutdown
cable upstream 1 shutdown
cable upstream 2 shutdown
cable upstream 3 shutdown
cable upstream 4 shutdown
cable upstream 5 shutdown
cable dhcp-giaddr policy
no keepalive
!
router eigrp 202
redistribute connected
redistribute static
network 10.0.0.0
network 192.168.0.0
no auto-summary
no eigrp log-neighbor-changes
!
router rip
version 2
redistribute connected
redistribute static
network 10.0.0.0
network 192.168.0.0
network 192.168.5.0
no auto-summary
!
ip default-gateway 192.168.5.5
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.5.5
ip http server
ip http authentication local
!
!
!
dialer-list 1 protocol ip permit
cdp run
!
snmp-server engineID local 00000009020000E01ED77E40
snmp-server community public RO
snmp-server community private RW
snmp-server enable traps tty
!
tftp-server server
tftp-server slot0:platinum.cm alias platinum.cm
!
line con 0
logging synchronous
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password laha1
login
line vty 5 15
password laha1
login
!
scheduler allocate 4000 400
end

The CMTS sits behind a Sonicwall TZ210 which only routes between their computer room and the CMTS. We're getting a DNS error but all the lights on my test modem setup at the headend all light up. I switched 2 commands from ip name server to dns-server x.x.x.x. There will be only 200 users just a basic setup to start is all I need.

Gary