Hello,
first - nice forum, much and helpful information.
Of course I have also a concern and would be happy if you could help me.
I need the bootimage (appimage) for BSR 2000 (nvram is clear, cf contains only the startup-config).
My email is umbralop (at) mail.ru
Thx a lot
BSR 2000 Power-On Diagnostics...
Board
Assembly PN = 520699-005-00
REV = A
Upper Level
Assembly PN = 520025-005-00
REV = A
BootROM Ver: 1.0.25 Created: Fri Jan 5 10:56:10 EST 2007
1. CPU Section ...Passed
2. Memory Section ...Passed
3. I2C Section ...Passed
4. Network Section ...Passed
5. RF MAC Section ...Passed
6. RF Tx Section ...Passed
7. RF Rx Section ...Passed
BSR 2000 Passed All Power-On Diagnostics...
Checking Sector 115 for proper TFFS format header
flMount: iTL = 0, status = 0x0
Compact Flash Driver not initialized... skipping format
Hello,
my BSR2000 keeps restarting during booting (while performing second tffs check). I tried to format CF and NVRAM, but it didn`t help. I`m thinking of using newer version of appImagew and bootrom. Can anybody send me these to email address mtrunky(AT)emtest(DOT)sk
And please if anybody had similar problems please let me know about solutions.
Thanks in advance.
And have a nice day.
Milan
I had that same issue with mine. Couldn't correct it. Sent it to CableSight, ...works like new now.
upgrade the bootimage can slove the problem .
I upgraded boot image to appImage_100P5907TRCU.bin but it did not help. Maybe I need to update bootrom (bootloader). Now I`m using 1.0.29 if you have any other plese send it to: mtrunky(at)emtest(dot)sk
And some instructions how to install new bootrom would be usefull too. Do I need Xilinx or just use TFTP?
Thanks in advance and special thanks to the guy who has sent me that appImage...