I need help with CMTS 1000.
I can change network settings:ip, subnet and gateway but after I turn off and on device settings change itself to default (no ip, no gateway). Can someone tell me is there a way to save these changes. This is causing me a headache.
Muharem
Start with "man" then "admin" then "info" and "provisioning-control ?":
Data Type Legal Values
--------- ------------
Enumeration item use-both-dhcp-and-tftp
use-dhcp
use-tftp
use-nvram
Only one choice is allowed.
Then set it like this:
Parameter Value
--------- -----
provisioning-control use-nvram
Thanks,
I managed to do this last night. Now I want to test cmts with cable modem. This is what I plan to do:
- connect modem to cmts (how to do this, on which ports - I guess on downstream and one of the upstream ports, how to combine these ports to go to modem bacause modem has only one rf on it and it will go via one cable through network)
- use miktotik pppoe server as I use for adsl
- use radius for user authentication
I need help with this initial setup
Muharem