Hi, everyone
I am a new in cm and docsis, I am trying to bring up the moto SBV5121E. It's sucessful connecting to the provisioning server, and completing the dhcp both for cm and mta, and their tftp download are sucessful too, but the mta provisioning failed. what's the necessary TLV for BASIC.2 flow in the mta config file?
boot up wireshark capture:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
6 48.584573 0.0.0.0 255.255.255.255 DHCP DHCP Discover - Transaction ID 0xa2cd896
7 48.585085 10.80.117.31 255.255.255.255 DHCP DHCP Offer - Transaction ID 0xa2cd896
8 48.595735 0.0.0.0 255.255.255.255 DHCP DHCP Request - Transaction ID 0xa2cd896
9 48.596195 10.80.117.31 255.255.255.255 DHCP DHCP ACK - Transaction ID 0xa2cd896
13 48.617019 10.80.117.19 10.80.117.31 TIME TIME Request
14 48.617324 10.80.117.31 10.80.117.19 TIME TIME Response
17 48.653888 10.80.117.19 10.80.117.32 TFTP Read Request, File: motorola_CM1.cfg\000, Transfer type: octet\000
18 48.654958 10.80.117.32 10.80.117.19 TFTP Data Packet, Block: 1 (last)
19 48.663419 10.80.117.19 10.80.117.32 TFTP Acknowledgement, Block: 1
22 62.375577 0.0.0.0 255.255.255.255 DHCP DHCP Discover - Transaction ID 0x378877e
23 62.376009 10.80.117.31 255.255.255.255 DHCP DHCP Offer - Transaction ID 0x378877e
24 62.386736 0.0.0.0 255.255.255.255 DHCP DHCP Request - Transaction ID 0x378877e
25 62.387137 10.80.117.31 255.255.255.255 DHCP DHCP ACK - Transaction ID 0x378877e
30 65.400233 10.80.117.13 10.80.117.31 DNS Standard query A pactprov.pclab.com
33 65.409778 10.80.117.31 10.80.117.13 DNS Standard query response A 10.80.117.31
34 65.422825 10.80.117.13 10.80.117.32 TFTP Read Request, File: MTA_motorola_1.cfg\000, Transfer type: octet\000
35 65.423918 10.80.117.32 10.80.117.13 TFTP Data Packet, Block: 1 (last)
36 65.432153 10.80.117.13 10.80.117.32 TFTP Acknowledgement, Block: 1
37 66.435730 10.80.117.13 10.80.117.31 SNMP informRequest 1.3.6.1.2.1.1.3.0 1.3.6.1.6.3.1.1.4.1.0 1.3.6.1.4.1.4491.2.2.1.1.1.4.0 1.3.6.1.4.1.4491.2.2.1.1.3.4.0 1.3.6.1.4.1.4491.2.2.1.1.1.9.0
38 66.519115 10.80.117.31 10.80.117.13 SNMP get-response 1.3.6.1.2.1.1.3.0 1.3.6.1.6.3.1.1.4.1.0 1.3.6.1.4.1.4491.2.2.1.1.1.4.0 1.3.6.1.4.1.4491.2.2.1.1.3.4.0 1.3.6.1.4.1.4491.2.2.1.1.1.9.0
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
mta dhcp discover:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Option: (t=53,l=1) DHCP Message Type = DHCP Discover
Option: (t=57,l=2) Maximum DHCP Message Size = 600
Option: (t=43,l=124) Vendor-Specific Information (CableLabs)
Suboption 2: Device Type = "EMTA"
Suboption 4: Serial Number = "158362835303606104010036"
Suboption 5: Hardware Version = "1.0"
Suboption 6: Software Version = "SBV5121-SIP-1.0.7-SCM-05-SHPC "
Suboption 7: Boot ROM version = "8.5"
Suboption 8: Organization Unique Identifier = 00:22:10
Suboption 9: Model Number = "SBV5121"
Suboption 10: Vendor Name = "Motorola Corporation"
Suboption 31: MTA MAC Address = 00:22:10:dd:b7:9a
Suboption 32: Correlation ID = 16838
Option: (t=60,l=88) Vendor class identifier = "pktc1.0:0526010100020102050101080501035349500901010A01010B04010306090D010110010912020007"
0x01: PacketCable Version = PacketCable 1.0 (00)
0x02: Number Of Telephony Endpoints = 02
0x05: MTA-24 Event SYSLOG Notification Support = Yes (01)
0x08: Vendor Specific TLV Type(s) = 0103534950
0x09: NVRAM Ticket/Session Keys Storage Support = Yes (01)
0x0A: Provisioning Event Reporting Support = Yes (01)
0x0B: Supported CODEC(s) = other (01), G.729 (03), PCMU (06), PCMA (09)
0x0D: Echo Cancellation Support = Yes (01)
0x10: MTA's "ifIndex" starting number in "ifTable" = 09
0x12: Supported Provisioning Flows = 0x0007
Option: (t=55,l=8) Parameter Request List
Option: (t=61,l=7) Client identifier
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
dhcp ack:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Option: (t=53,l=1) DHCP Message Type = DHCP ACK
Option: (t=54,l=4) DHCP Server Identifier = 10.80.117.31
Option: (t=51,l=4) IP Address Lease Time = 1 day
Option: (t=12,l=8) Host Name = "mtamoto1"
Option: (t=15,l=9) Domain Name = "pclab.com"
Option: (t=1,l=4) Subnet Mask = 255.255.255.0
Option: (t=3,l=4) Router = 10.80.117.62
Option: (t=2,l=4) Time Offset = 8 hours
Option: (t=6,l=4) Domain Name Server = 10.80.117.31
Option: (t=7,l=4) Log Server = 10.80.117.31
Option: (t=122,l=80) CableLabs Client Configuration [TODO:RFC3495]CableLabs Client Configuration (80 bytes)
Suboption 1: TSP's Primary DHCP Server: 10.80.117.31 (4 bytes)
Suboption 2: TSP's Secondary DHCP Server: 10.80.117.31 (4 bytes)
Suboption 3: TSP's Provisioning Server: pactprov.pclab.com (20 bytes)
Suboption 4: TSP's AS-REQ/AS-REP Backoff and Retry: (12 bytes)
Suboption 5: TSP's AP-REQ/AP-REP Backoff and Retry: (12 bytes)
Suboption 6: TSP's Kerberos Realm Name: BASIC.2 (9 bytes)
Suboption 7: TSP's Ticket Granting Server Utilization: No (1 byte)
Suboption 8: TSP's Provisioning Timer Value: 10 (1 byte)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
MTA_motorola_1.cfg
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Main
{
MtaConfigDelimiter 1;
SnmpMibObject pktcSigDefCallSigTos.1 Integer 26 ;
SnmpMibObject pktcSigDefMediaStreamTos.1 Integer 46 ;
SnmpMibObject pktcSigTosFormatSelector.1 Integer 2; /* dscpCodepoint */
SnmpMibObject pktcNcsEndPntConfigCallAgentId.1 String "08111@10.80.117.31" ;
SnmpMibObject pktcMtaDevCmsIpsecCtrl.'08111@10.80.117.31' Integer 2; /* false */
SnmpMibObject pktcMtaDevEnabled.1 Integer 1; /* true */
SnmpMibObject pktcMtaDevCmsKerbRealmName.'08111@10.80.117.31' String "BASIC.2" ;
SnmpMibObject pktcMtaDevRealmOrgName.'BASIC.2' String "Really Amazing Telephone Company" ;
SnmpMibObject pktcNcsEndPntConfigCallAgentUdpPort.1 Integer 2427 ;
SnmpMibObject pktcNcsEndPntConfigMWD.1 Integer 10 ;
SnmpMibObject pktcSigDevRgCadence.1 HexString 0x003ff00000000000 ;
SnmpMibObject mib-2.140.1.2.11.0 HexString 0x98713770cbf28a2a982f2656905e78224f0bcd94 ;
MtaConfigDelimiter 255;
}
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
mib-2.140.1.2.11.0 item is added by the provioning server, the value is the File Hash.
http://192.168.100.1/mtaLogs.htm
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Time Level ID Message
2011-03-22 09:44:49 3-Minor 131084 AS REPLY: INCORRECT CNAME
2011-03-22 09:44:49 3-Minor 131083 AS REPLY: WRONG NUM OF NAME COMPONENT
2011-03-22 09:44:49 2-Major 4000951502 Provisioning Complete - Fail
2011-03-22 09:44:49 3-Minor 131082 AS REPLY: BAD NAME TYPE
2011-03-22 09:44:48 3-Minor 131080 AS REPLY: BAD PROTOCOL VERSION NUMBER
2011-03-22 09:44:48 4-Warning 4259877 XGCPIF: Received unknown payload type for RTP
2011-03-22 09:44:48 3-Minor 65558 DHCP ACK: MISSING OR ERROR IN LOGSERVER OPTION
2011-03-22 09:44:45 3-Minor 131100 AS REPLY: DECRYPTION OF ENC PART FAILED
2011-03-22 09:44:45 3-Minor 131099 AS REPLY: ENC PART NOT PRESENT IN TICKET
1970-01-01 00:00:14 3-Minor 131089 AS REPLY: DECODE OF PA DATA FAILED
1970-01-01 00:00:14 3-Minor 131089 AS REPLY: DECODE OF PA DATA FAILED
1970-01-01 00:00:01 3-Minor 131087 AS REPLY: WRONG NUM OF PA DATA
1970-01-01 00:00:01 3-Minor 65557 DHCP ACK: MISSING OR ERROR IN DNS OPTION
1970-01-01 00:00:01 Unknown 4194305 Succesfully Registered SYSLOG functions
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Can you tell me what was wrong?
The logs is not in enough detail, can the cm or mta be telneted? I try to telnet 192.168.100.1 by LAN, but fail.
I have a copy of the "SBV5X2X-SIP Provisioning Specification" document here.
It says
"2.1 Provisioning Modes
The EMTA will need to support a number of different provisioning modes for customers deploying SIP signaling
prior to the PacketCable 2.0 standardization. The number and diversity of provisioning modes may require
multiple code images. Refer to the SBV5X2X-SIP Firmware Release Notes for the list of code images and
provisioning modes supported.
The MTA provisioning mode may be selected using the cmMtaProvMode MIB object. The MIB object may be set
via SNMP in the factory or in the CM configuration file. The setting is persistent. Not all provisioning modes will
be available for all SW build types. Each build type will have a default provisioning mode 1 and may support
alternate provisioning modes. Upon initialization, if the provisioning mode stored in non-volatile memory is not
supported by the build type, the default provisioning mode will be used."
Then it goes on to talk about
* PacketCable 1.0 Compatibility Mode
* PacketCable 1.5 Compatibility Mode
* Euro-PacketCable 1.5 Compatibility Mode
* Legacy Dual-File Mode
* PacketCable 2.0 Compatible Mode
* PacketCable Bypass Mode
--
I'm no expert in the Moto EMTA, but I remember using this doc to get a SBV6120 to come online OK using BASIC.1
I looked over your config and it looks about right. Although not sure about some of the MTA config you included, I didnt have any IPSec / Kerb etc statements in my mta config when I tested the 6120....
The thing that scares me about BASIC provisioning is what happens if you get a smart user who works out how to grab the mta config files off your tftp server? Then they can see the SIP usernames/passwords and make calls as other users....
Not sure if its ok to post the moto provisioning file here. Maybe send me an email if you want it. michael at bowe id au
Vendors must use the secure flow to provion the cm and mta, in this mode, the config file is encrypted in the network, so if the user grab it in the process of tftp download, he can not decrypt. But if the tftp server was hacked, no way to stop stealing the SIP usernames/passwords. The secure of tftp server should be enhanced.
It will be grate if you sent me the SBV5X2X-SIP Provisioning Specification document, and the moto provisioning file. I can not found them in google searching.
Thank you very much for you help. My email is xieqianli690@gmail.com.
I've sent you the provisioning doc I had, as well as example cm and mta config files for 6120. Apparently the 6120 is very similar provisioning to the 5121
Hopefully that helps!
Post your findings here so other people can learn from your research :-)
mbowe, Thank you very much for you help!
I found that there is an root user besides admin. I user the root login the website of the cm, there is an additional menu 'Advanced'. Below is the key logs:
Provisioning Errors
OID Value Reason
1.3.6.1.4.1.4491.2.2.1.1.2.7.48 NO_CREATION
Unknown Digest Algorithm, HashLength invalid
In PKT-SP-PROV1.5 spec, pktcMtaDevProvConfigHash which is calculated by sha-1 is needed to added to the config file, I think the value calculated by my provioning server is incorrect, I need to figure out this problem first.
I went back through my notes for when I tested 6120 MTA with BASIC provisioning
Here's a few snippets :
in the cm config file you can tell modem to advertise particular packetcable mode
SnmpMibObject cmMtaProvMode.0 Integer 2; /* pcProv15 */
for the MTA config file, have to include a SHA hash.
To do this, create the source config file (without the pktcMtaDevProvConfigHash)
Compile the config file
Work out the sha hash of the binary file eg : sha1sum my-mta.bin
Then add the hash into the source file eg
SnmpMibObject pktcMtaDevProvConfigHash.0 HexString 0x65188b391afcd8855862f9f7092cc4cae3e56240;
(Needs to be the last line before the eof marker)
Then compile the file again
Pretty messy, but i guess you could use some sort of script to automate this.
Or use an editor that can add the hash during creation (eg PacketACE)
Or use a provisioning server that adds the hash on the fly.
Hi, mbowe
Previously, I use docsis-0.9.6 to compile the config file, but it isn't support GI-BTI-MIB. I found a tool which named bticonfig_2.33 on your website, and use bticonfig_basic mode to compile the txt file, the sha1 will be added in the bin file. The hash number is correct now.
Then, base on the 6120 config file you gave me, I can bring up the mta now. I deleted all the NCS config tlv while maintain the sip tlv. But the following tlvs must be comment, or the mta will repeat dhcp and tftp, and provision always in process.
#TLV11 GI-BTI-MIB btiSipEndPntCfgUserId[1] = "08111@10.80.117.40"
#TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayName[1] = "08111"
#TLV11 GI-BTI-MIB btiSipEndPntCfgAuthName[1] = "08111@open-ims.test"
#TLV11 GI-BTI-MIB btiSipEndPntCfgAuthPassword[1] = "08111"
Althought the provisioning is completed, the mta won't register to the sip proxy server. What was wrong in the above value? Did you success to register it?
Below is my config file:
FileVersion = BtiVersion 7.0
#===========================================================
# START: BTI Specific MIB Objects
# Provisioning for sip
#===========================================================
TLV11 PKTC-MTA-MIB pktcMtaDevEnabled[0] = 1
# TOS format selector = DSCP
TLV11 PKTC-SIG-MIB pktcSigTosFormatSelector[0] = 2
# set signaling TOS value to IPv4 = 4
TLV11 PKTC-SIG-MIB pktcSigDefCallSigTos[0] = 32
# media stream TOS value to IPv4 = 5
TLV11 PKTC-SIG-MIB pktcSigDefMediaStreamTos[0] = 40
# Line 1
#-------------------------------------------------------------------------
#TLV11 GI-BTI-MIB btiSipEndPntCfgUserId[1] = "08111@10.80.117.40"
#TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayName[1] = "08111"
#TLV11 GI-BTI-MIB btiSipEndPntCfgAuthName[1] = "08111@open-ims.test"
#TLV11 GI-BTI-MIB btiSipEndPntCfgAuthPassword[1] = "08111"
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyPort[1] = 5060
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyAddr[1] = "10.80.117.40"
TLV11 GI-BTI-MIB btiSipEndPntCfgOutboundProxyAddr[1] = "10.80.117.40"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegistrarAddr[1] = "10.80.117.40"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegistrarPort[1] = 5060
TLV11 GI-BTI-MIB btiSipEndPntCfgRegRetryTimeout[1] = 5
TLV11 GI-BTI-MIB btiSipEndPntCfgDigitMap[1] = "XXXXX"
TLV11 GI-BTI-MIB btiSipEndPntCfgSubscribeMsgWaitPkg[1] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgUseCodecTable[1] = 1
TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayClid[1] = 2
TLV11 GI-BTI-MIB btiSipEndPntCodecType[1][1] = 6
# Line 2
#-------------------------------------------------------------------------
#TLV11 GI-BTI-MIB btiSipEndPntCfgUserId[2] = "09111@10.80.117.40"
#TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayName[2] = "09111"
#TLV11 GI-BTI-MIB btiSipEndPntCfgAuthName[2] = "09111@open-ims.test"
#TLV11 GI-BTI-MIB btiSipEndPntCfgAuthPassword[2] = "09111"
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyPort[2] = 5060
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyAddr[2] = "10.80.117.40"
TLV11 GI-BTI-MIB btiSipEndPntCfgOutboundProxyAddr[2] = "10.80.117.40"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegistrarAddr[2] = "10.80.117.40"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegistrarPort[2] = 5060
TLV11 GI-BTI-MIB btiSipEndPntCfgRegRetryTimeout[2] = 5
TLV11 GI-BTI-MIB btiSipEndPntCfgDigitMap[2] = "XXXXX"
TLV11 GI-BTI-MIB btiSipEndPntCfgSubscribeMsgWaitPkg[2] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgUseCodecTable[2] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayClid[2] = 2
TLV11 GI-BTI-MIB btiSipEndPntCodecType[2][1] = 6
#-------------------------------------------------------------------------
#TLV11 GI-BTI-MIB btiSipDevLocalTransport[0] = 1
TLV11 GI-BTI-MIB btiSipDevLocalPort[0] = 5060
TLV11 GI-BTI-MIB btiSipDevRegistrationExpiresTime[0] = 3600
TLV11 GI-BTI-MIB btiSipDevReregistrationHeadstartTime[0] = 30
##### MTA features Setting ##########
#-------------------------------------------------------------------------
TLV11 GI-BTI-MIB btiSipEndPntCfgEcanEnabled[1] = 1
TLV11 GI-BTI-MIB btiSipEndPntCfgEcanEnabled[2] = 1
TLV11 GI-BTI-MIB btiSipEndPntCfgVadMode[1] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgVadMode[2] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgCngMode[1] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgCngMode[2] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgIpDialingEnabled[1] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgIpDialingEnabled[2] = 2
## Feature Table ##
#-------------------------------------------------------------------------
# MTA-specific settings encoded in TLV43 block
#-------------------------------------------------------------------------------------------------
TLV43 S08 0x03 0x00 0x20 0x40 \ # Motorola vendor ID, MUST BE FIRST IN BLOCK !!!
S101 0x01 0x28 \ # Nominal Jitter Buffer Size, Voice, 40ms
S102 0x01 0x50 \ # Maximum Jitter Buffer Size, Voice, 80ms
S103 0x01 0x28 \ # Nominal Jitter Buffer Size, Non-Voice
S104 0x01 0x50 \ # Maximum Jitter Buffer Size, Non-Voice
S126 0x01 0x02 \ # QoS Type - DQoS
Thank you & Best Regards
I went back to my notes and found the following mta config file
Main
{
MtaConfigDelimiter 1;
/* global config */
SnmpMibObject pktcMtaDevEnabled.0 Integer 1; /* true */
SnmpMibObject pktcSigDefCallSigTos.0 Integer 40 ;
SnmpMibObject pktcSigDefMediaStreamTos.0 Integer 46 ;
SnmpMibObject pktcSigTosFormatSelector.0 Integer 2 ;
SnmpMibObject snmpCommunityName.1 String "public";
SnmpMibObject snmpCommunitySecurityName.1 String "@mtaprov";
SnmpMibObject snmpCommunityStorageType.1 Integer 2;
SnmpMibObject snmpCommunityStatus.1 Integer 4;
/* line 1 */
SnmpMibObject btiSipEndPntCfgDigitMap.1 String "000|106|101|[*#]xx#|*#xx#|*xx.#|*xx.*x.#|##|183[12]|11xx|12xxx.[t#]|130xxxxxxx|13[1-35-9
]xxx|134[0-46-9]xx|1345xxxx|1[89]0[012]xxxxxx|180[2-9]xxx|[45689]xxxxxxx|0198xxxxxx|02[4689]xxxxxxx|03[45689]xxxxxxx|04xxxxxxxx|07[3459]xxxxxxx|
08xxxxxxxx|0011x.[t#]"; /* if longer than 255 need to use TLV 64 encoding! */
SnmpMibObject btiSipEndPntCfgUserId.1 String "xxxxxxxxxx";
SnmpMibObject btiSipEndPntCfgDisplayName.1 String "xxxxxxxxxx";
SnmpMibObject btiSipEndPntCfgAuthName.1 String "xxxxxxxxxxxx";
SnmpMibObject btiSipEndPntCfgAuthPassword.1 String "zzzzzzz";
SnmpMibObject btiSipEndPntCfgProxyAddr.1 String "asterisk.example.com";
SnmpMibObject btiSipEndPntCfgRegistrarAddr.1 String "asterisk.example.com";
SnmpMibObject btiSipEndPntCfgUseCodecTable.1 Integer 1;
SnmpMibObject btiSipEndPntCodecType.1.1 Integer 9 ;
SnmpMibObject btiSipEndPntCodecType.1.2 Integer 6 ;
/*
SnmpMibObject btiSipEndPntCfgSubscribeMsgWaitPkg.1 Integer 2;
SnmpMibObject btiSipEndPntCfgDisplayClid.1 Integer 2;
SnmpMibObject pktcNcsEndPntConfigCallWaitingDelay.9 Integer 30;
*/
SnmpMibObject ifAdminStatus.9 Integer 1;
/* line 2 */
SnmpMibObject btiSipEndPntCfgUserId.2 String "";
SnmpMibObject ifAdminStatus.10 Integer 2 ; /* down */
/* config file authentication */
/* have to set this by hand sha1sum my-mta.bin (without this hash line included), then regen the file */
SnmpMibObject pktcMtaDevProvConfigHash.0 HexString 0x65188b391afcd8855862f9f7092cc4cae3e56240;
MtaConfigDelimiter 255;
}
maybe that will help?
if your docsis compiler doesnt support those bti mibs, it should just be a case of dumping the moto mibs into your /usr/local/share/snmp or similar dir
and I also fixed up my website so those moto mib files should now be downloadable if you need them
FileVersion = BtiVersion 7.0
TLV11 PKTC-MTA-MIB pktcMtaDevEnabled[0] = 1
# Line 1
#-------------------------------------------------------------------------
TLV11 GI-BTI-MIB btiSipEndPntCfgUserId[1] = "500"
TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayName[1] = "500"
TLV11 GI-BTI-MIB btiSipEndPntCfgAuthName[1] = "500"
TLV11 GI-BTI-MIB btiSipEndPntCfgAuthPassword[1] = "500"
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyPort[1] = 5060
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyAddr[1] = "10.80.117.15"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegistrarAddr[1] = "10.80.117.15"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegRetryTimeout[1] = 5
TLV11 GI-BTI-MIB btiSipEndPntCfgDigitMap[1] = "XXX"
TLV11 GI-BTI-MIB btiSipEndPntCfgSubscribeMsgWaitPkg[1] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayClid[1] = 2
# Line 2
#-------------------------------------------------------------------------
TLV11 GI-BTI-MIB btiSipEndPntCfgUserId[2] = "600"
TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayName[2] = "600"
TLV11 GI-BTI-MIB btiSipEndPntCfgAuthName[2] = "600"
TLV11 GI-BTI-MIB btiSipEndPntCfgAuthPassword[2] = "600"
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyPort[2] = 5060
TLV11 GI-BTI-MIB btiSipEndPntCfgProxyAddr[2] = "10.80.117.15"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegistrarAddr[2] = "10.80.117.15"
TLV11 GI-BTI-MIB btiSipEndPntCfgRegRetryTimeout[2] = 5
TLV11 GI-BTI-MIB btiSipEndPntCfgDigitMap[2] = "XXX"
TLV11 GI-BTI-MIB btiSipEndPntCfgSubscribeMsgWaitPkg[2] = 2
TLV11 GI-BTI-MIB btiSipEndPntCfgDisplayClid[2] = 2
Now still have one problem. After register to the openims server, the MTA will not send out the SUBSCRIBE request, so that can not may a call~
Maybe SB5121 SIP does not comply with the IMS spec. So I shift to the Asterisk to test. Asterisk no need SUBSCRIBE, but another problem comes out.
Make a call from mta1 to mta2(the other SBV5121), Request was rejected.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4 0.026006 10.80.117.13 10.80.117.15 SIP/SDP Request: INVITE sip:500@10.80.117.15, with session description
5 0.026310 10.80.117.15 10.80.117.13 SIP Status: 100 Trying
6 0.026821 10.80.117.15 10.80.117.16 SIP/SDP Request: INVITE sip:500@10.80.117.16;user=phone, with session description
7 0.042564 10.80.117.16 10.80.117.15 SIP Status: 400 Bad Request
8 0.042658 10.80.117.15 10.80.117.16 SIP Request: ACK sip:500@10.80.117.16;user=phone
9 0.045225 10.80.117.15 10.80.117.13 SIP Status: 503 Service Unavailable
10 0.060163 10.80.117.13 10.80.117.15 SIP Request: ACK sip:500@10.80.117.15
...........................................................................................................
Request-Line: INVITE sip:500@10.80.117.16;user=phone SIP/2.0
Session Name (s): Asterisk PBX asteriskv6-20080107
Connection Information (c): IN IP4 10.80.117.15
Time Description, active time (t): 0 0
Media Description, name and address (m): audio 15492 RTP/AVP 0 3 8 112 5 10 7 97 111 9 101
Media Attribute (a): rtpmap:0 PCMU/8000
Media Attribute (a): rtpmap:3 GSM/8000
Media Attribute (a): rtpmap:8 PCMA/8000
Media Attribute (a): rtpmap:112 AAL2-G726-32/8000
Media Attribute (a): rtpmap:5 DVI4/8000
Media Attribute (a): rtpmap:10 L16/8000
Media Attribute (a): rtpmap:7 LPC/8000
Media Attribute (a): rtpmap:97 iLBC/8000
Media Attribute (a): fmtp:97 mode=30
Media Attribute (a): rtpmap:111 G726-32/8000
Media Attribute (a): rtpmap:9 G722/16000
Media Attribute (a): rtpmap:101 telephone-event/8000
Media Attribute (a): fmtp:101 0-16
Media Attribute (a): silenceSupp:off - - - -
Media Attribute (a): ptime:20
Media Attribute (a): sendrecv
but mta to xlite is ok
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4 0.025853 10.80.117.13 10.80.117.15 SIP/SDP Request: INVITE sip:200@10.80.117.15, with session description
5 0.026122 10.80.117.15 10.80.117.13 SIP Status: 100 Trying
6 0.026552 10.80.117.15 10.80.115.38 SIP/SDP Request: INVITE sip:200@10.80.115.38:11752;rinstance=5a8fceda34882fd0, with session description
7 0.128795 10.80.115.38 10.80.117.15 SIP Status: 180 Ringing
8 0.128959 10.80.117.15 10.80.117.13 SIP Status: 180 Ringing
Hello,
can anyone provide me that firmware: SBV5121-SIP-1.0.7-SCM-05-SHPC
Because i have only the 1.0.0 version which seems to have some bugs.
Thanks in advance
Michael