MTA Lockup and dtmf using rfc2833 in sip mode problems | docsis.org

You are here

MTA Lockup and dtmf using rfc2833 in sip mode problems

3 posts / 0 new
Last post
dpecile
MTA Lockup and dtmf using rfc2833 in sip mode problems

I have some problems trying to startup my telephony service.

I have 1 Arris 402p running fine, but refuse to send dtmf tones outband. (I am sending the telephony events codec, and setting the callp feature. I readed in some Arris paper that this callp feature work only in ncs mode. Is that true ?

I have some 501A that come with packet cable firmware, I upgraded to SIP firmware, but lockup when receive the dhcp offer (the same that work with the 402p.
The firmware in the 501A is TS060151D_033009_NA.MODEL_4_5.SIP.TELNET_ON.
The server is docsis-server and the options are manually encoded like 122 options.

Any idea will be great.

Demian

dpecile
I already check everything

I already check everything and so far I can see its all ok.
I am provisioning in gupi (option 9) , sending basic.1 in option 6 of 122 dhcp offer to the mta, and using the mac.bin, and the strange thing is when the mta receive the offer, the mta freeze and restart.
I am not sending the file name in the offer, may be this could be the cause ?

Any Idea ?

Thanks and regards.

Demian

dpecile
I finally was able to get

I finally was able to get running the MTA, but only if don't send the option 122.
I don't know if my options are wrong or is a bug in the new firmware.

I hope this could be usefull for someone.

Demian

Log in or register to post comments