DOCSIS-Sever 3.5 - Problem with DHCP Discover/DHCP Offer

24 posts / 0 new

Sat, 03/21/2009 - 04:22

Anonymous (not verified)

Dear All,
we have just set up the Docsis-Server 3.5 and we cannot get the CM to sent a DHCP Ack. CM are stuck in dhcp(o). We are using:

SA-CM -> BSR2000 -> Docsis-Server 3.5

03/20-22:45:07.47:Udp-dhcp]-D-Relay BOOTREQ DISCOVER packet from cable 0/0 to server with src 10.10.0.1, dst x.x.x.206, srcport 68, dstport 67 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:1a:c3:06:b3:00, xid 0x34a88f2a, VPN 0

[03/20-22:45:07.56:Udp-dhcp]-D-Relay BOOTREP OFFER to client on cable 0/0 with src 10.10.0.1, dst 10.10.0.6, srcport 67, dstport 68 ciaddr 0.0.0.0, yiaddr 10.10.0.6, giaddr 10.10.0.1, chaddr 00:1a:c3:06:b3:00, xid 0x34a88f2a, VPN 0

On a different site we use a different DHCP-Server. The main differents is that the BOOTREP OFFER looks different. The dst is the Boradcast address 255.255.255.255. And here is works.

[03/20-09:51:32.71- 07:Udp-dhcp]-D-Relay BOOTREP OFFER to client on cable 0/0 with src 10.70.192.1, dst 255.255.255.255, srcport 67, dstport 68 ciaddr 0.0.0.0, yiaddr 10.70.192.90, giaddr 10.70.192.1, chaddr 00:11:80:2c:e0:22, xid 0x05c76374, VPN 0

Any idea what we have to change in the Docsis-Server 3.5 to make it work?

Thanks for your help.
TK

Mon, 03/23/2009 - 04:35

cmcaldas

debug

From the dhcp server, can you ping the modem gateway? from the BSR2k, if you type ping and then enter, you can walk your way through to do a ping from the modem gateway (source) to the dhcp server (destination). on the BSR2k, try a debug ip udp dhcp. this will help show what the modems and BSR2k see and do.
How is the BSR2k configured? there are 4 10/100 ports and 2gigE ports. does the dhcp server connect to one of those ports or does it go through a router and firewall? What does your config/route look like on the BSR2k?

Carl

Mon, 03/23/2009 - 05:47

(Reply to #2) #3

onvaris (not verified)

DHCP Discover/DHCP Offer

Hi Carl,
Thanks for you replay. From the DHCP-Server I can Ping the CM-GW and CPE-GW configured on the CMTS and other way around. I have done the debugs and what I see is the followring: On the CMTS I see the Discover and Offer from CMTS & DHCP Server, but not a Req from the CM... Here is the output from the Debug on the CMTS:

3/20-22:45:07.47:Udp-dhcp]-D-Relay BOOTREQ DISCOVER packet from cable 0/0 to server with src 10.10.0.1, dst 192.168.0.48, srcport 68, dstport 67 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:1a:c3:06:b3:00, xid 0x34a88f2a, VPN 0

The conf on the interface looks like this: The DHCP is in the same subnet as the ethernet 0/0. No FW in place. I think routing is fine, more a DHCP issue (setup or something):

interface cable 0/0
ip address 10.10.0.1 255.255.252.0
ip address 192.168.1.1 255.255.255.0 secondary host
cable helper-address 192.168.0.48 cable-modem
cable helper-address 192.168.0.48 host
cable dhcp-giaddr primary
ip dhcp relay information option
host authorization on
dhcp leasequery authorization on

interface ethernet 0/0
ip address 192.168.0.49 255.255.255.0

ip route 0.0.0.0 0.0.0.0 192.168.0.2

Thanks for you help & support.

Regards
TK

Mon, 03/23/2009 - 07:11

(Reply to #3) #4

cmcaldas

try to remove

cable dhcp-giaddr primary

mine looks like this:
cable upstream 3 rate-limit
cable upstream 3/0 active-codes 128
cable upstream 3/0 codes-minislot 32
cable upstream 3/0 spread-interval 4
no cable upstream 3 shutdown
no cable upstream 3/0 shutdown
cable upstream 3/1 shutdown
cable upstream 3/2 shutdown
cable upstream 3/3 shutdown
cable invited-ranging-attempts 0
cable ucd-interval 2000
no cable concatenation docsis-1.0
cable dynamic-service authorization-mode authorize
cable dynamic-service active-timeout 300
ip dhcp relay information option
host authorization on
dhcp leasequery authorization on
cable downstream schedule priority-wfq
no cable wireless downstream modulation qpsk

Also, what bootrom and firmware are you running on the cmts?

Mon, 03/23/2009 - 07:32

(Reply to #4) #5

onvaris (not verified)

Remove gia & SW Version

...upps, now my replay is in the middle...
sorry.
TK

Mon, 03/23/2009 - 08:10

(Reply to #5) #6

onvaris (not verified)

Trace is on the WAY

Just sent you the trace and a show run ...
Thanks.
TK

Mon, 03/23/2009 - 09:21

(Reply to #6) #7

cmcaldas

Trace

I'm @ work so can't check it out as much as I should. but sent you one from my setup with the same modem model
and dhcp options I use

Mon, 03/23/2009 - 19:19

(Reply to #7) #8

sonny

Can you show the log of the

Can you show the log of the docsis_server ?
maybe the problem is miss some option ?

Sonny

Mon, 03/23/2009 - 22:55

(Reply to #8) #9

onvaris (not verified)

Log from DHCP Server

Hi Sonny,
here is the log:
| 2009-03-24 | 02:33:33 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-03-24 | 02:34:06 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-03-24 | 02:34:09 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-03-24 | 02:34:16 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-03-24 | 02:34:48 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-03-24 | 02:34:52 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
+------------+----------+----------+---------+------+--------------+-------------+--------------+-----------+-----------------+--------+

I have already sent Carl my results from the last tests which I have done:
What do you think?
------
Hi Carl,
I moved the vlan, but still same issue. Then I changed the subnet-options and noticed that the DHCP-OFFER from the DHCP will not include the changes. So I did some more changes incl. domain-name, time-offset ect with the same results - nothing will change inside the DHCP-OFFER. When I delete all CM from the database, I receive a DHCP-NACK, so subnet and cm tables are working on the DHCP-Server. But somehow the option-tables does not. I believe the option table is somehow not bind to the subnet and cm table, but here is my conf: Also I sent you the Trace with ethereal.

Any Ideas?

Here is the config on the mysql from the DHCP-Sever:

Thanks for you help and support.

Regards
TK

mysql> select * from config_nets;
+---------+-------------+-----------+----------------+-------------+------------+--------------+-----------+-------------+---------------+------------+-------------+-------------+-------------+
| nettype | cmts_ip | cmts_vlan | network | gateway | grant_flag | dynamic_flag | full_flag | range_min | range_max | lease_time | config_opt1 | config_opt2 | config_opt3 |
+---------+-------------+-----------+----------------+-------------+------------+--------------+-----------+-------------+---------------+------------+-------------+-------------+-------------+
| CM | 10.10.0.1 | 0 | 10.10.0.0/22 | 10.10.0.1 | NO | NO | NO | 10.10.0.5 | 10.10.3.254 | 86400 | 1 | 0 | 0 |
| CPE | 192.168.1.1 | 0 | 192.168.1.0/24 | 192.168.1.1 | YES | NO | NO | 192.168.1.2 | 192.168.1.254 | 86400 | 100 | 0 | 0 |
+---------+-------------+-----------+----------------+-------------+------------+--------------+-----------+-------------+---------------+------------+-------------+-------------+-------------+
2 rows in set (0.00 sec)

mysql> select * from docsis_modem;
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
| modem_macaddr | cmts_vlan | serialnum | subnum | config_file | dynamic_config_file | static_ip | dynamic_ip | config_opt |
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
| 0011e622c0d7 | 0 | 001 | 0 | 6000.bin | 0 | 0 | 0 | 0 |
| 002180fc32d6 | 0 | 002 | 0 | 20000.bin | 0 | 0 | 0 | 0 |
| 001ac306b300 | 0 | 003 | 0 | 20000.bin | 0 | 0 | 0 | 0 |
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
3 rows in set (0.00 sec)

mysql> select * from config_opts;
+-----------+--------+----------+-----------+-------------------------+---------+-----------------+
| server_id | opt_id | opt_type | opt_dtype | opt_value | sub_opt | comment |
+-----------+--------+----------+-----------+-------------------------+---------+-----------------+
| 1 | 54 | 4 | IP | 192.168.0.48 | 0 | Lease Server IP |
| 1 | 6 | 8 | 2IP | 192.168.0.2,192.168.0.3 | 0 | DNS Servers |
| 1 | 15 | 14 | CHAR | lab-01.onvaris.de | 0 | Domain Name |
| 1 | 2 | 4 | INT32 | -100 | 0 | Time Offset |
| 1 | 4 | 4 | IP | 10.10.0.1 | 0 | Time Server |
| 1 | 7 | 4 | IP | 10.10.0.1 | 0 | Log Server |
| 1 | 66 | 4 | CHAR | 192.168.0.48 | 0 | TFTP Server |
+-----------+--------+----------+-----------+-------------------------+---------+-----------------+
7 rows in set (0.00 sec)

mysql>
----

Wed, 03/25/2009 - 01:40

(Reply to #9) #10

Lopez

cmts_vlan

Hi, try to change cmts_vlan int docsis_modem to "1". I use uBR7246VXR and docsis server 2.0.4 and my cmts_vlan is set 1. Can you log to the modem from ethernet, what is in the modem log?(sorry for my English).

Wed, 03/25/2009 - 09:42

(Reply to #10) #11

kwesibrunee

I have never used docsis

I have never used docsis server for DHCP but if these are the only options you are sending the modems

| 1 | 54 | 4 | IP | 192.168.0.48 | 0 | Lease Server IP |
| 1 | 6 | 8 | 2IP | 192.168.0.2,192.168.0.3 | 0 | DNS Servers |
| 1 | 15 | 14 | CHAR | lab-01.onvaris.de | 0 | Domain Name |
| 1 | 2 | 4 | INT32 | -100 | 0 | Time Offset |
| 1 | 4 | 4 | IP | 10.10.0.1 | 0 | Time Server |
| 1 | 7 | 4 | IP | 10.10.0.1 | 0 | Log Server |
| 1 | 66 | 4 | CHAR | 192.168.0.48 | 0 | TFTP Server |

then your problem is that the modems cannot talk back to the DHCP Server because you have not given them a gateway. You need to add a routers option with the appropriate gateway for the modems.

The other thing I notice is
mysql> select * from docsis_modem;
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
| modem_macaddr | cmts_vlan | serialnum | subnum | config_file | dynamic_config_file | static_ip | dynamic_ip | config_opt |
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
| 0011e622c0d7 | 0 | 001 | 0 | 6000.bin | 0 | 0 | 0 | 0 |
| 002180fc32d6 | 0 | 002 | 0 | 20000.bin | 0 | 0 | 0 | 0 |
| 001ac306b300 | 0 | 003 | 0 | 20000.bin | 0 | 0 | 0 | 0 |
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
3 rows in set (0.00 sec)

shouldn't config_opt be a '1' not a '0' so you use the right opts?

Wed, 03/25/2009 - 21:14

(Reply to #11) #12

sonny

your cable modem don't have

your cable modem don't have ack the offer.
CMTS_VLAN set be 1. even you don't have use vlan , also config_nets same.

and docsis server 3.5 config_opts table is different with docsis server 2.0.4
watch out the table
server _id : 1
opt_id : 100
opt_type: the option code
..........etc

different is don't have length

Thu, 03/26/2009 - 07:00

(Reply to #12) #13

onvaris (not verified)

changing Subnet- and CM-Table to VLAN 1

Hi Sonny, Hikwesibrunee,
1. I have changed the config_opt in the CM-Table to 1 - still no DHCP-ACK received.
2. I have changed the cmts_vlan to 1 in config_nets-Table & in the docsis_modem-Table to 1 as well. - now we are receiving DHCP-NACK.
3. Then, I changed the config_opt in the docsis_modem-Table to 0 - then we see an DHCP-OFFER but still no DHCP-ACK.

The conf now looks like this:
mysql> select * from config_nets;
+---------+-------------+-----------+----------------+-------------+------------+--------------+-----------+-------------+---------------+------------+-------------+-------------+-------------+
| nettype | cmts_ip | cmts_vlan | network | gateway | grant_flag | dynamic_flag | full_flag | range_min | range_max | lease_time | config_opt1 | config_opt2 | config_opt3 |
+---------+-------------+-----------+----------------+-------------+------------+--------------+-----------+-------------+---------------+------------+-------------+-------------+-------------+
| CM | 10.10.0.1 | 1 | 10.10.0.0/22 | 10.10.0.1 | NO | NO | NO | 10.10.0.5 | 10.10.3.254 | 86400 | 1 | 0 | 0 |
| CPE | 192.168.1.1 | 1 | 192.168.1.0/24 | 192.168.1.1 | YES | NO | NO | 192.168.1.2 | 192.168.1.254 | 86400 | 100 | 0 | 0 |
+---------+-------------+-----------+----------------+-------------+------------+--------------+-----------+-------------+---------------+------------+-------------+-------------+-------------+
2 rows in set (0.00 sec)

mysql> select * from docsis_modem;
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
| modem_macaddr | cmts_vlan | serialnum | subnum | config_file | dynamic_config_file | static_ip | dynamic_ip | config_opt |
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
| 0011e622c0d7 | 1 | 001 | 0 | 6000.bin | 0 | 0 | 0 | 0 |
| 002180fc32d6 | 1 | 002 | 0 | 20000.bin | 0 | 0 | 0 | 0 |
| 001ac306b300 | 1 | 003 | 0 | 20000.bin | 0 | 0 | 0 | 0 |
+---------------+-----------+-----------+--------+-------------+---------------------+-----------+------------+------------+
3 rows in set (0.00 sec)

mysql> select * from config_opts;
+-----------+--------+----------+-----------+-------------------------+---------+-----------------+
| server_id | opt_id | opt_type | opt_dtype | opt_value | sub_opt | comment |
+-----------+--------+----------+-----------+-------------------------+---------+-----------------+
| 1 | 54 | 4 | IP | 192.168.0.48 | 0 | Lease Server IP |
| 1 | 6 | 8 | 2IP | 192.168.0.2,192.168.0.3 | 0 | DNS Servers |
| 1 | 15 | 14 | CHAR | lab-01.onvaris.de | 0 | Domain Name |
| 1 | 2 | 4 | INT32 | -100 | 0 | Time Offset |
| 1 | 3 | 4 | IP | 192.168.0.48 | 0 | Lease Server IP |
| 1 | 4 | 4 | IP | 10.10.0.1 | 0 | Time Server |
| 1 | 7 | 4 | IP | 10.10.0.1 | 0 | Log Server |
| 1 | 66 | 4 | CHAR | 192.168.0.48 | 0 | TFTP Server |
+-----------+--------+----------+-----------+-------------------------+---------+-----------------+
8 rows in set (0.00 sec)

mysql> select * from config_opts_macs;
Empty set (0.00 sec)

mysql>

Thanks for help.

Thanks and Regards
TK

Thu, 03/26/2009 - 15:20

(Reply to #13) #14

kwesibrunee

Any chance you could send us

Any chance you could send us a decoded DHCPOFFER packet i.e. using Wireshark that would go a long way to determining what is going on.

Thu, 03/26/2009 - 15:25

(Reply to #14) #15

onvaris (not verified)

Wireshark trace...

Of course just give me an email address.
Thanks
TK

Thu, 03/26/2009 - 19:05

(Reply to #15) #16

sonny

if you use docsis server 3.5

if you use docsis server 3.5 ans
+-----------+--------+----------+-----------+---------------------------+---------+-----------------+
| server_id | opt_id | opt_type | opt_dtype | opt_value | sub_opt | comment |
+-----------+--------+----------+-----------+---------------------------+---------+-----------------+
| 1 | 10 | 2 | INT32 | 28800 | 0 | Time Offset |
| 1 | 10 | 15 | CHAR | cm.domainname.com | 0 | Domain Name |
| 1 | 10 | 6 | 2IP | 10.200.200.254,168.95.1.1 | 0 | DNS Servers |
| 1 | 10 | 54 | IP | 10.200.200.253 | 0 | Lease Server IP |
| 1 | 10 | 4 | IP | 10.200.200.253 | 0 | Time Server |
| 1 | 10 | 7 | IP | 10.200.200.253 | 0 | Log Server |
| 1 | 10 | 66 | CHAR | 10.200.200.253 | 0 | TFTP Server |
+-----------+--------+----------+-----------+---------------------------+---------+-----------------+

Tue, 04/07/2009 - 03:56

(Reply to #16) #17

onvaris (not verified)

CM are come online - CPE not

Hi Sonny,
THANKS - that was the problem. I missconfigured the options. I used your setup and now CM are comming online - great.

But now the CPE are not getting an IP-Address. In the DHCP_LOG I see that they will be identified as CM not CPE - idea?

Here is the log:
DHCP-SERVER:
mysql> select * from dhcp_log;
+------------+----------+----------+---------+------+--------------+-------------+--------------+-----------+-----------------+--------+
| thedate | thetime | serverid | sending | type | dynamic_flag | mcache_flag | b_macaddr | b_ipaddr | b_modem_macaddr | subnum |
+------------+----------+----------+---------+------+--------------+-------------+--------------+-----------+-----------------+--------+
| 2009-04-07 | 11:49:29 | 1 | OFFER | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-04-07 | 11:49:30 | 1 | ACK | CM | NO | NO | 143897932502 | 168427525 | 0 | 0 |
| 2009-04-07 | 11:50:36 | 1 | NAK | CM | NO | NO | 111187091296 | 0 | 143897932502 | 0 |
| 2009-04-07 | 11:50:37 | 1 | NAK | CM | NO | NO | 111187091296 | 0 | 143897932502 | 0 |

FROM CMTS:
CM
[04/07-11:50:29.48:Udp-dhcp]-D-Relay BOOTREQ DISCOVER packet from cable 0/0 to server with src 10.10.0.1, dst 192.168.0.48, srcport 68, dstport 67 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:21:80:fc:32:d6, xid 0x6f007332, VPN 0
[04/07-11:50:29.51:Udp-dhcp]-D-Relay BOOTREP OFFER to client on cable 0/0 with src 10.10.0.1, dst 10.10.0.5, srcport 67, dstport 68 ciaddr 0.0.0.0, yiaddr 10.10.0.5, giaddr 10.10.0.1, chaddr 00:21:80:fc:32:d6, xid 0x6f007332, VPN 0
[04/07-11:50:29.60:Udp-dhcp]-D-Relay BOOTREQ REQUEST packet from cable 0/0 to server with src 10.10.0.1, dst 192.168.0.48, srcport 68, dstport 67 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:21:80:fc:32:d6, xid 0x6f007332, VPN 0
[04/07-11:50:30.01:Udp-dhcp]-D-Relay BOOTREP ACK to client on cable 0/0 with src 10.10.0.1, dst 10.10.0.5, srcport 67, dstport 68 ciaddr 0.0.0.0, yiaddr 10.10.0.5, giaddr 10.10.0.1, chaddr 00:21:80:fc:32:d6, xid 0x6f007332, VPN 0

CPE
[04/07-11:50:36.13:Udp-dhcp]-D-Relay BOOTREQ DISCOVER packet from cable 0/0 to server with src 10.10.0.1, dst 192.168.0.48, srcport 68, dstport 67 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:19:e3:44:5f:60, xid 0x4257c062, VPN 0
[04/07-11:50:36.28:Udp-dhcp]-D-Relay BOOTREP NAK to client on cable 0/0 with src 10.10.0.1, dst 0.0.0.0, srcport 67, dstport 68 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:19:e3:44:5f:60, xid 0x4257c062, VPN 0

Thanks and Regards
TK

Tue, 04/07/2009 - 19:29

(Reply to #17) #18

sonny

E-mail to me your config_net

E-mail to me your config_net table , docsis_modem table
my E-mail : sonny420@gmail.com

and i think dhcp server reject your dhcp request!

Wed, 04/08/2009 - 16:31

(Reply to #18) #19

onvaris (not verified)

delete "cable dhcp-giaddr primary" and it works

Hi Sonny,
I have just forwarded you the config. When we delete the "cable dhcp-giaddr primary" from the cable interface the CPE are getting an IP Address. Is there anything what we can adjust in the dhcp-server to support "cable dhcp-giaddr primary"?

Thanks and Regards
TK

Sun, 04/12/2009 - 19:06

(Reply to #19) #20

sonny

look your log is the "Cable

look your log
is the "Cable dhcp-giaddr primary" will let your cm and cpe dhcp request giaddr all use cable modem gateway ?
if yes , then you can't use docsis server , because different subnet ,in the same gateway , docsis server can't assign ip for that.
in normal state , primary ip in cmts --> cm gateway , secondary ip in cmts --cpe gateway .

Thu, 03/26/2009 - 15:27

(Reply to #20) #21

kwesibrunee

jasonp at cablemo.com

Wed, 03/25/2009 - 21:19

(Reply to #21) #22

sonny

lol that is the magic from

lol

that is the magic from docsis_server

router , mask , gateway option will give with opt_nets table, it's use gateway ip address to assign the ip
, so i can't dynamic change assign different subnet when the same gateway .....
but docsis_server is still enough for everybody.

Mon, 03/23/2009 - 07:28

#23

onvaris (not verified)

Remove gia & SW Version

Hi Carl,
I have removed the cable dhcp-giaddr primary command - still no DHCP - ACK.

[03/23-15:26:06.57:Udp-dhcp]-D-Relay BOOTREQ DISCOVER packet from cable 0/0 to server with src 10.10.0.1, dst 192.168.0.48, srcport 68, dstport 67 ciaddr 0.0.0.0, yiaddr 0.0.0.0, giaddr 10.10.0.1, chaddr 00:21:80:fc:32:d6, xid 0x6fca3a58, VPN 0
[03/23-15:26:06.72:Udp-dhcp]-D-Relay BOOTREP OFFER to client on cable 0/0 with src 10.10.0.1, dst 10.10.0.2, srcport 67, dstport 68 ciaddr 0.0.0.0, yiaddr 10.10.0.2, giaddr 10.10.0.1, chaddr 00:21:80:fc:32:d6, xid 0x6fca3a58, VPN 0

Here is my Version:
BSR 2000(tm) version 1.0.0P59.07.TRCU
Copyright (c) 2005 by Motorola.
Compiled Sun Nov 2 21:36:52 EST 2008
MPC7447A processor with 512MB memory.
Boot ROM : 1.0.30
CPU : MPC7447A
Memory Size : 512 MB
Board Program ID : RD
Format Version : 11
Assembly Type : 39
Board Part Number : 520699-005-00
Board Serial Number : C060351000079358
Board Rev : A
Upper Level Part Number : 520025-005-00
Upper Level Serial Number : C060351010079492
Upper Level Rev : A
FPGA Revision : 0.220
If you want I can forward you the ethereal trace...

Thanks and Regards
TK

Mon, 03/23/2009 - 07:42

(Reply to #23) #24

cmcaldas

Trace

Hi TK
yes, email me the trace and I'll take a quick look at it. the cmts is running the latest firmware and bootrom, so that's not a problem. send along a sh run as well.

cmcaldas@gmail.com

Main menu

Navigation

You are here

DOCSIS-Sever 3.5 - Problem with DHCP Discover/DHCP Offer

Main menu

Navigation

User login

You are here

DOCSIS-Sever 3.5 - Problem with DHCP Discover/DHCP Offer