Reset CM counters via SNMP command |

You are here

Reset CM counters via SNMP command

3 posts / 0 new
Last post
Reset CM counters via SNMP command


I am monitoring some cable modems using the snmp querys as follow

snmpwalk -v 2c -c public DOCS-IF-MIB::docsIfSigQUnerroreds.3
snmpwalk -v 2c -c public DOCS-IF-MIB::docsIfSigQUncorrectables.3
snmpwalk -v 2c -c public DOCS-IF-MIB::docsIfSigQCorrecteds.3
snmpwalk -v 2c -c public DOCS-IF-MIB::docsIfCmStatusResets.2

I would like to know if there is any snmp query to reset or clear this counters, instead to reboot the cable modem.


Asaf Kolman

I think you shouldn't reset

I think you shouldn't reset counters. Perhaps better way for you is to monitor it and store it into rrd or tsdb. Than you can see on what exact time you have problems. Resetting it to 0 it will only deliver you that you've had a problem. As you are looking at the downstream values I believe that this errors are not appearing all the time.


Asaf (not verified)
Hi Janko,

Hi Janko,

thanks for your comment but I want to reset this value.
I don't want to store this info as it cost me a lot of DB resources.