Hi Docsis community,
I would like to see with you guys , your Docsis 3 experiences and first if somebody is using allready
Docsis 3.0 Thomson TCM470, I appreciated to see an example of docsis 3 CM config file. especially one using 4 downstreams
Best Regrads.
We use Docsis 3.0 for a long time. We use the Arris and Cisco modems. In both cases, the configuration is Docsis3.0 in the CMTS, not in CM config file.
Tom.
...
You guys must have very large systems. I have very small ones so DOCSIS 3 is really not a big deal.
emkowale
Yes i know .... but the question is that :
if i want to write 4 freq in the Cm config what is the syntax ?
Regards
May the force be with you
As Tom mentioned the downstream bonding function and control is configured in the cmts.
You shouldn't be "broadcasting" multiple downstream frequencies from multiple CMTS into the same area of the plant. These should be narrowcast. Generally there are bad things that can happen in the upstream direction during the modem ranging process (prior to the modem getting the config file) when there are multiple downstream signals present.