Arris CMTS 1000 / 1500 Stuff | docsis.org

You are here

Arris CMTS 1000 / 1500 Stuff

3 posts / 0 new
Last post
kreg
Arris CMTS 1000 / 1500 Stuff

Seems I'm just making one giant "LAN" as I add more and more cable users behind my 1000 or 1500. Does anyone know how to separate cable modems from others behind the Arris? Perhaps VLANs?

I've been trying to dabble into the capabilities of docsis, but it's difficult to be sure. Seems VLAN's are a feature of docsis but I do not know which version nor how to code it for the docsis 0.95 compiler.

Could it be possible to tunnel VLAN's across the CMTS to single out a CM? I could use a CM as a backbone for other networks such as a wireless AP, or group neighbourhoods to direct them to various PPPoE servers on the ISP side. Would there even be a ponit? In an ATM network I can see that being pointless. Don't know if that's true for a Cable network. Seems to be lots of noise out there on the wire due to it being a single network.

Any similar suggestions?
-Kreg

hinzoo
There are actually two ways

There are actually two ways of doing this; first - use "funnel-mode" in CMTS CLI or second - use IP filters inside modem file

dkokoshi
configuration file for docsis 1.1 with snmp enabled

Hi !
I dont know if someone could help me with a configuration file for docsis 1.1 with snmp enabled for any type of modem (motorola or arris).
Thanks

Log in or register to post comments