Hi All, I using motorola BSR 64000 and configured lag interface for two interface gigaether but i don't know what is Cisco switch L2 configuration mode etherchannel? Pls help me. Thanks!
It varies depending on the switch model, but in general it sounds like this:
1. create a port group
! interface Port-channel2 description This is the Group for aggregation
2. Add the Interfaces to the created Group
interface GigabitEthernet0/9 description CMTS 1 channel-group 2 mode on
interface GigabitEthernet0/10 description CMTS 1 channel-group 2 mode on
3. Check who are the members of the port Group
show int port-channel 2
Good luck.
M.
Hello, how to configure an lag interface in BSR64000?
Thanks in advance.
It varies depending on the switch model, but in general it sounds like this:
1. create a port group
!
interface Port-channel2
description This is the Group for aggregation
2. Add the Interfaces to the created Group
interface GigabitEthernet0/9
description CMTS 1
channel-group 2 mode on
interface GigabitEthernet0/10
description CMTS 1
channel-group 2 mode on
3. Check who are the members of the port Group
show int port-channel 2
Good luck.
M.
Hello, how to configure an lag interface in BSR64000?
Thanks in advance.