Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog Card in slot 3/0 is not up Router#sh diag 3/0 conlog ----- Start of console log for slot 3/0----- start2:g_spa_mdr_bitmap=00000000 LCDOS (C10000 4 SPA Jacket Card Image (Spumoni) : DEVELOPMENT BUILD BLD-v122_33_sch_lc_throttle.lcdos-UNIQ-v122_33_sch_lc_throttle-V122_33_SCH3-v122_33_sch_throttle /view/BLD-v122_33_sch_lc_throttle.lcdos-UNIQ-v122_33_sch_lc_throttle-V122_33_SCH3-v122_33_(1403216567). Built by alnguyen at Thu Jun 19 15:26:56 2014. Soft restart, boot from 0x42000000, DRAM size 512MB. Zeroed BSS from 0x403C37C0 to 0x4080BF50. Software version 1.1 Jacket4SPA : Persistent data was INVALID (re-initialized and enabled) CLUE_STORAGE: storage area required 10608372 bytes; (previous CLUE has 0 bytes) CLUE_STORAGE: reserved CLUE region at 0x5BFF0D79 for 10608372 bytesc10k_memory_init:Initializing C10K JACKET CARD Slot:3 Card_name:4jacket-1 malloc area starts at: 0x4BFE7D6D ends at: 0x5BFE7D6D, with size: 268435456 bytes Main chunk pool (main_poolp) from 0x4080BF50 to 0x4BFE7D6D, 123583 buffers Jacket4SPA Chunk Pool initialization done: mlc_sdata 0x40382C58, mlc_edata 0x4080BF44 ..Error with CONLOG command sync Router#