Problems with DTCC slot - Cisco uBR 10012 | docsis.org

You are here

Problems with DTCC slot - Cisco uBR 10012

1 post / 0 new
costa
Problems with DTCC slot - Cisco uBR 10012
AttachmentSize
Image icon logs dtcc.png33.03 KB

Hi everyone, I have a ubr10012 and I am experiencing problems with the 2/1 slot of the DTCC module, since the third one I change and has the same fault, simply stops functioning and does not start any more.
Can anyone give me a hint how to solve this?
I have already applied the cisco suggestions but the problem continues.
Attached the logs.

Cisco IOS Software, 10000 Software (UBR10K4-K9P6U2-M), Version 12.2(33)SCF1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Fri 30-Sep-11 18:16 by prod_rel_team

ROM: System Bootstrap, Version 12.2(20071113:194412) [shalpin-rom-1_2 101], DEVELOPMENT SOFTWARE

ITB_UBR10K uptime is 4 weeks, 6 days, 12 hours, 45 minutes
Uptime for this control processor is 4 weeks, 6 days, 12 hours, 44 minutes
System returned to ROM by power-on
System image file is "disk0:ubr10k4-k9p6u2-mz.122-33.SCF1.bin"
Last reload type: Normal Reload

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco uBR10000 (PRE4-RP) processor with 2588671K/163839K bytes of memory.
Processor board ID SPE104600D6
SB-1 CPU at 800Mhz, Implementation 0x410, Rev 5.0, 512KB L2 Cache
Backplane version 1.1, 8 slot

Last reset from power-on
PXF processor tmc0 is running.
PXF processor tmc1 is running.
PXF processor tmc2 is running.
PXF processor tmc3 is running.
1 DTCC card(s) ******Are two DTCC cards but slot 2/1 have fail
1 Jacket card(s): 1 SPA card(s)
1 FastEthernet interface
5 Gigabit Ethernet interfaces
40 Cable Modem interfaces
7039K bytes of non-volatile configuration memory.

125440K bytes of ATA compact flash in bootflash (Sector size 512 bytes).
500472K bytes of ATA compact flash in disk0 (Sector size 512 bytes).
Configuration register is 0x2102