You are here

BSR64000 running-config

6 posts / 0 new
Last post
Marek
BSR64000 running-config

BSR64000HD config
Hi, can you help me, I need config for BSR64000 and start with basic config, now CMTS config is empty, after factory. I need help from someone with config, can somebody help me.
Many thanks :-)

config to fix, downstream, upsteram synchronized, no ip :-(

giganet 15/0 static 192.168.178.2
server dhcp, provisioning linux 192.168.178.1

username sysadmin user-group sysadmin
!
ip domain-lookup
!

no cable downstream classifier cam-sharing enable
!
cable cmts type domestic
!
redundancy drx reset-after-switchover
!
no cable dhcp throttle upstream
!
interface cable 0/0
cable helper-address 192.168.178.1 cable-modem global
cable helper-address 192.168.178.1 host global
cable helper-address 192.168.178.1 mta global
#cable dynamic-service authorization-mode unauthorize
no shutdown
ip dhcp relay information option
!
slot 0
!
slot 7
!
slot 9
cable dtx type euro
!
slot 15
interface gigaether 15/0
no shutdown
ip address 192.168.178.2 255.255.255.0
exit

//downstream -9//

cable downstream port 9/0
cable downstream interleave-depth 12
cable downstream 0 frequency 178000000
cable downstream modulation 256
cable downstream 0 trap-enable-rdn
no cable downstream 0 shutdown
cable downstream 1 trap-enable-rdn
no cable downstream 1 shutdown
cable downstream 2 trap-enable-rdn
no cable downstream 2 shutdown
cable downstream 3 trap-enable-rdn
no cable downstream 3 shutdown
no cable downstream shutdown
!

cable upstream port 0/0
cable upstream 0 channel-width 6400000
cable upstream 0 frequency 52000000
cable upstream 0 trap-enable-rdn
cable upstream 0 trap-enable-cmts
cable upstream 0/0 channel-type atdma
cable upstream 0/0 pre-equalization
cable upstream 0/0 modulation-profile 202
cable upstream 0/0 trap-enable-rdn
cable upstream 0/0 trap-enable-cmts
cable upstream 1 channel-width 6400000
cable upstream 1 frequency 44500000
cable upstream 1 trap-enable-rdn
cable upstream 1 trap-enable-cmts
cable upstream 1/0 channel-type atdma
cable upstream 1/0 pre-equalization
cable upstream 1/0 modulation-profile 202
cable upstream 1/0 trap-enable-rdn
cable upstream 1/0 trap-enable-cmts
cable upstream 2 channel-width 6400000
cable upstream 2 frequency 36000000
cable upstream 2 trap-enable-rdn
cable upstream 2 trap-enable-cmts
cable upstream 2/0 channel-type atdma
cable upstream 2/0 pre-equalization
cable upstream 2/0 modulation-profile 202
cable upstream 2/0 trap-enable-rdn
cable upstream 2/0 trap-enable-cmts
cable upstream 3 channel-width 6400000
cable upstream 3 frequency 58800000
cable upstream 3 trap-enable-rdn
cable upstream 3 trap-enable-cmts
cable upstream 3/0 channel-type atdma
cable upstream 3/0 pre-equalization
cable upstream 3/0 modulation-profile 202
cable upstream 3/0 trap-enable-rdn
cable upstream 3/0 trap-enable-cmts
no cable upstream 0/0 shutdown
no cable upstream 0 shutdown
no cable upstream 1/0 shutdown
no cable upstream 1 shutdown
no cable upstream 2/0 shutdown
no cable upstream 2 shutdown
no cable upstream 3/0 shutdown
no cable upstream 3 shutdown
cable upstream 4/0 shutdown
cable upstream 4 shutdown
cable upstream 5/0 shutdown
cable upstream 5 shutdown
no cable upstream shutdown
!
How to set dhcp for cable modem

cmcaldas
reply sent

Hi Marek
I had replied to the original post, there's more to it that's needed than just adding ip addresses to the loopback.
once the reply has been approved by admin, the answers will be in there

Marek
Thanks for your replly, I

Thanks for your replly, I have EuroDocsis 3.0 TX\RX, SRM4 and Ether-Flex 1000/100/10 card, all modules HD. I can't set routing, may be dhcp internal, from motorola (ospf router - I dont know how to config), or external DHCP. For lan I use Gigaethernet SFP port 0, have a ping, set helper for all modems
interface cable 0/0
cable helper-address 192.168.178.2 cable-modem global
cable helper-address 192.168.178.2 host global

What I should set nex to modems get IP?

Many thanks & BR (sorry for my english)

cmcaldas
contact info

Hi Marek
my first reply had the info needed, but the message said the reply had to be reviewed by the admin.
post your email and I can send some info that way

Best regards
Carl

Marek
My email: marekk14@wp.pl

My email: marekk14@wp.pl

Marek
now I have config ( up/down.

now I have config ( up/down. synchronized, no ip, how to start with dhcp?:

no ipv6 unicast-routing
username admin user-group sysadmin
username admin nopassword

cable cmts type domestic
!
cable fiber-node FN0

cable spectrum-group sg00

hop action modulation-profile 825 priority 128
hop action modulation-profile 824 priority 128
hop action roll-back

cable utilization-interval 60
!
redundancy drx reset-after-switchover

slot 9
cable dtx type euro
!
cable downstream port 9/0
cable downstream interleave-depth 8
cable downstream 0 frequency 531000000
cable downstream modulation 256
no cable downstream 0 shutdown
no cable downstream 1 shutdown
no cable downstream 2 shutdown
no cable downstream 3 shutdown
cable downstream fiber-node FN0
no cable downstream shutdown

cable upstream port 0/0
cable upstream physical-delay automatic
cable upstream 0 channel-width 6400000
cable upstream 0 frequency 57500000
cable upstream 0/0 channel-type atdma
cable upstream 0/0 pre-equalization
cable upstream 0/0 modulation-profile 826
no cable upstream 0/0 shutdown
cable upstream 1 channel-width 6400000
cable upstream 1 frequency 51000000
cable upstream 1/0 channel-type atdma
cable upstream 1/0 pre-equalization
cable upstream 1/0 modulation-profile 826
no cable upstream 1/0 shutdown
cable upstream 2 channel-width 6400000
cable upstream 2 frequency 44500000
cable upstream 2/0 channel-type atdma
cable upstream 2/0 pre-equalization
cable upstream 2/0 modulation-profile 826
no cable upstream 2/0 shutdown
cable upstream 3 channel-width 6400000
cable upstream 3 frequency 38000000
cable upstream 3/0 channel-type atdma
cable upstream 3/0 pre-equalization
cable upstream 3/0 modulation-profile 826
no cable upstream 0/0 shutdown
no cable upstream 0 shutdown
no cable upstream 1/0 shutdown
no cable upstream 1 shutdown
no cable upstream 2/0 shutdown
no cable upstream 2 shutdown
no cable upstream 3/0 shutdown
no cable upstream 3 shutdownno
no cable upstream shutdown

cable upstream 0 spectrum-group sg00
cable upstream 1 spectrum-group sg00
cable upstream 2 spectrum-group sg00
cable upstream 3 spectrum-group sg00
cable upstream fiber-node FN0

interface gigaether 15/0
ip address 192.168.178.2 255.255.255.0
no shutdown

interface cable 0/0
cable bundle 1
no ip address
cable helper-address 192.168.178.1 cable-modem global

cable bind downstream 9/0/0,9/0/1,9/0/2,9/0/3
cable bind upstream 0/0,0/1,0/2,0/3

no shutdown
cable downstream bonding-group 9040 9/0/0 9/0/1 9/0/2 9/0/3
cable upstream bonding-group 40 0/0/0 0/1/0 0/2/0 0/3/0
#cable mtc-mode
ip dhcp relay information option

thanks & BR

docsis