You are here

Cacti Graphs

7 posts / 0 new
Last post
darkng
Cacti Graphs

HI, I am looking for help regarding Cacti Graphs like DS PWR, DS SNR, US PWR; US SNR, T3, T4, MicroReflections , wideband and other things for cacti to graphs . My specific immediate need is to complete a template with cacti, learn to integrage the template/import/export etc.

My test environment is configured with CentOS 6,8 with uBR7246 and i can add some test modems, all work can be done remotely.
Please message me with your hourly rate.
Email: agashi5@live.com

Thank you.

righter
Cacti Version

Hi Which Cacti version are you using and what is your desired poller intervall?

darkng
Version 1.0.4

Hello righter,

Thank you for your response. Im using the Cacti Version Version 1.0.4 and the desiver poller intervall 5min/10minutes. Could anyone help me for this case on Cacti.
i would like to get some help to archive this. If anyone already has done this, i'm able to pay something to get this project working.

JMH
We use Cacti. I'm not the

We use Cacti. I'm not the greatest at it, but I bully my way through and make it go.

I have no idea what an hourly rate might be, because there's a good chance you're only a few minutes away from what you need.

windwaterwaves
CMTS Stats

It's ready been done search for these you'll see the entire setup.
-rw-r--r-- 1 cacti cacti 2369 Jul 18 12:24 ss_docsis_cmts_cm_count.php
-rw-r--r-- 1 cacti cacti 2756 Feb 22 14:49 ss_docsis_stats.php

darkng
Hello

Hello windwaterwaves, Hello JMH

First of all thank you very much for your response.
I have a small operator with a cisco 10k - 2 MC20x20 cards.

I did some tests to import the templates : ss_docsis_stats.php and ss_docsis_cmts_cm_count.php and some others and i was able to start graphing some data with too much difficults but after many hours sitting and trying i managed it to see some graphs.
But again i would re-install cacti and try it again with some help from someone that knows Cacti very well : like getting with teamviewer and explaining from the scretch ( not installing cacti but How to use it andd add devices , importing templates etc) .

I know that there are many docs but i would appreciate to learn it fast by getting help from somebody with more experience than me.

What would be interesting to learn is how to integrate a modem/cmts via SHELL and assign some templates to them. Because if i start now to add every modem to cacti and assign templates to them it's difficult and it would take me hours or some days to do it.
I want to learn the way how to do it by doing it via shell by using mactrack/autom8 or any other solution that would help for this.
For example when i add 1 modem to my provisioing system, to start graphing the modem with one template that i have prepared.
I would be happy if anyone has some time and hints for me to archieve this work and project. :)

if yes please add me to skype : n-orix11

JMH
The unfortunate side of Cacti

The unfortunate side of Cacti--unless you have the MacTrack setup, as well as Autom8 (I don't, actually... despite the desire to). You'll have to do static management IP addresses for your modems if that's what you're wanting to track.

docsis