How to configure to make CM register in Arris C3 CMTS | docsis.org

You are here

How to configure to make CM register in Arris C3 CMTS

4 posts / 0 new
Last post
Anonymous (not verified)
How to configure to make CM register in Arris C3 CMTS

I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).

I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing

just missing the configuration of the cable modem. Please help me. thanks

wittmann
Re: How to configure to make CM register in Arris C3 CMTS

arris_c3 wrote:I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).

I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing

just missing the configuration of the cable modem. Please help me. thanks

Hello,

first, i don't believe the FE0/1 and the cable1/0 IP-Address should are the same, but equal.

Is it possible to configure a cable helper-address (IP-Address from the Provisioning (DHCP, TOD, TFTP, SYSLOG). The CMTS must known where he put the DHCP Discover from the CM.

I hope i can help, we have only cisco uBR's.

Anonymous (not verified)
Re: How to configure to make CM register in Arris C3 CMTS

wittmann wrote:arris_c3 wrote:I have a external DHCP server (10.10.10.7)
TFTP server (10.10.10.7).

I already configure the
FE0/1 as 10.10.10.1
cable1/0 as 10.10.10.1 secondary
no l2-bg-to-bg-routing

just missing the configuration of the cable modem. Please help me. thanks

Hello,

first, i don't believe the FE0/1 and the cable1/0 IP-Address should are the same, but equal.

Is it possible to configure a cable helper-address (IP-Address from the Provisioning (DHCP, TOD, TFTP, SYSLOG). The CMTS must known where he put the DHCP Discover from the CM.

I hope i can help, we have only cisco uBR's.

Thanks, I already setup a external DHCP, and TFTP server;

[The CMTS must known where he put the DHCP Discover from the CM.]
This is the part I don't quit know how to configure.

I hope the russian guy can help me out with this. I saw he has a lot of good comment on Arris CMTS.

Anonymous (not verified)
How to configure to make CM register in Arris C3 CMTS

all config required. :)

Log in or register to post comments