Old Motorola BSR 1000 R ... need a little help :) | docsis.org

You are here

Old Motorola BSR 1000 R ... need a little help :)

8 posts / 0 new
Last post
marekpo
Old Motorola BSR 1000 R ... need a little help :)

Hi everybody ... i want to use an old motorola bsr 1000 r to test cablemodem, amplifiers and so on before they are put into the network.
After configuring and trying snmp and so on i saw an error occured.

Task tExcTask (taskId 0x7dfd9f8) Partition 0x8ca780: Task tRDNc (taskId 2c23978) is dead and possibly leaked memory

did anybody know what this error means maybe reinstall the firmware or dead cmts ??

nice day

marek

cmcaldas
show ver

Believe upstream port issue, can you post the show ver to confirm bootrom and image? was it running bridge or router image?

Carl

marekpo
show ver

Hi ... thank you for your answer

BSR 1000R version 2.0.1.11P01.PRRI
BootROM: 00.03.01.TA

configuration is like a router .. i only use first upstream channel .. modems ranging, connecting to upstream port .. but after this nothing .. status --> dhcp(d)

best regards
Marek

cmcaldas
image and bootrom

they look fine. the root issue you have is with the route from the dhcp server to the modem gateway.
it can ping the modem's 100 baseT port, but bet not the modem gateway. so let's say the dhcp server is 192.168.10.10 /24; cmts enet is 192.168.10.11 /24 , modem gateway is 10.10.10.1 /24
if running windows, from your dos prompt, type in route add 10.10.10.0 mask 255.255.255.0 192.168.10.11

~Carl

marekpo
DHCP

thank you very much for your answer
i use debian as dhcp server ... configuration of this is working i tried this with an old knovartis bridge cmts .. works fine ...
i´ve added the route like you wrote but there is nothing ... after i restart the cmts in log are snmp notifications and than the error occurs .. after this there are no more snmp notificiations and so on ...

Did you think this error is a cause of dhcp failure ??

This error comes nearly 1 min after booting regardless if there are modems or RF is terminated with 75Ohm.

Thank you

Marek

here is the failure:

CMTS#sh log
Preparing log file for reading ...
[04/27-11:43:52.05:telnet02]-N-user enabled-user authenticated
[04/27-11:43:47.06:telnet02]-N-connection made from 192.168.1.55 on session 02
[04/27-11:38:18.01:tExcTask]Task tExcTask (taskId 0x7dfd9f8) Partition 0x8ca780: Task tRDNc (taskId 2c23958) is dead and possibly leaked memory
[04/27-11:38:07.97:telnet01]-N-user enabled-user authenticated
[04/27-11:37:55.96:telnet01]-N-connection made from 192.168.1.1 on session 01
[04/27-11:37:31.94:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:37:31.94:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:37:26.95:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:37:26.94:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.96:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.95:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.96:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.97:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.97:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.98:SNMP]-N-SNMP Notification sent to 192.168.1.55!
[04/27-11:36:53.00:console]-N-configuration change by [console]: cable downstrea m schedule priority-wfq
[07/15-09:19:12.02:console]-N-configuration change by [console]: cable flap-list trap-enable
[07/15-09:19:12.04:console]-N-configuration change by [console]: cable dynamic-s ervice authorization-mode disable
[07/15-09:19:12.00:console]-N-configuration change by [console]: cable upstream 3 shutdown
[07/15-09:19:12.06:SPECMGR]-N-Shut down succeed for channel ifIndex = 7 .
[07/15-09:19:12.05:console]-N-configuration change by [console]: cable upstream 3 rate-limit
[07/15-09:19:12.05:console]-N-configuration change by [console]: cable upstream 3 frequency 56000000
--More--

and configuration:

CMTS#sh running
!
! Last configuration change at SUN JUL 15 09:19:07 2001
!
!
!
enable password 0 test
!
hostname CMTS
!
!
!
no service password-encryption
!
username sysadmin user-group sysadmin
username sysadmin password 0 sysadmin
!
!
ip domain-name TEST.NET
ip name-server 192.168.1.100
!
logging control docsis
logging admin-status unconstrained
logging rate-limit 100 1
logging buffered notifications
logging console informational
!
!
!
!
interface loopback 1
no shutdown
!
interface ethernet 0/0
ip address 192.168.1.2 255.255.255.0
no shutdown
!
interface cable 0/0
ip address 10.3.2.1 255.255.0.0
cable helper-address 192.168.1.1 cable-modem
cable helper-address 192.168.1.1 host
cable helper-address 192.168.1.1 mta
no shutdown
cable downstream 0 description Downstream586
cable downstream 0 frequency 586000000
cable downstream 0 power-level 450
no cable downstream 0 shutdown
cable upstream 0 frequency 22000000
cable upstream 0 rate-limit
cable upstream 0 shutdown
cable upstream 1 frequency 30000000
cable upstream 1 rate-limit
no cable upstream 1 shutdown
cable upstream 2 frequency 52500000
cable upstream 2 rate-limit
cable upstream 2 shutdown
cable upstream 3 frequency 56000000
cable upstream 3 rate-limit
cable upstream 3 shutdown
cable dynamic-service authorization-mode disable
cable flap-list trap-enable
cable downstream schedule priority-wfq
no cable wireless downstream modulation qpsk
!
!
!
!
!
!
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 0.0.0.0 0.0.0.0 192.168.1.100
!
ip multicast-routing
!
route-map test permit 10
!
snmp-server engineid local 80001375030030b88052df00
snmp-server context
snmp-server context CMTS-NDW
snmp-server community public ro
snmp-server chassis-id Serial Number: XXX-YY-ZZZZ
snmp-server contact
snmp-server sysname Name not set
snmp-server enable informs
snmp-server enable traps snmp
snmp-server enable traps ospf
snmp-server enable traps bgp
snmp-server enable traps entity
snmp-server enable traps docsdevcmts
snmp-server enable traps flap
snmp-server enable traps pim
snmp-server host 192.168.1.55 traps version 1 public
snmp-server location Location not set
snmp-server trap rate-limit 100 1
!
!
packet-cable
dqos shutdown
no em shutdown
!
!
ipsec
ipsec shutdown
!
password telnet 0 test
password console 0 test
!
session-timeout console 0
session-timeout telnet 5
!
telnet session-limit 8
!
!
!
!
!
!
!
no ssh enable
!
ip source-route
!
logging on
logging trap informational
logging snmp-trap notifications
logging facility local7
logging 192.168.1.1
!
clock timezone EU 2 0 daylightsavings off
!
!
!
!
time-of-day server 192.168.1.1
cable shared-secret 0 "DTEST"
logging reporting debug local-trap-syslog
enable rdn-process
!
!
!
!
!
cable service-class
mab DefBEDown 1
!
mab DefRRDown 1
!
mab DefBEUp 1
!
mab DefRRUp 1
!
mab DefUGS 1
!
mab DefUGSAD 1
!
mab DefRTPS 1
!
mab DefNRTPS 1
!
!
!

cmcaldas
missing something

on the cable interface, add ip dhcp relay info option
without that, it won't pass the dhcp requests. feel this will fix the modems not coming online issue. as for the error, I don't have the list or causes anymore, but don't think will cause problem for lab modem testing

marekpo
Problem solved :)

Thank you very very much for this help ...

i activated the dhcp option and modems get their ip adresses ... they won´t get tod and tftp (init(o)) but i will try to find the issue ... i thought the cmts is damaged because of this failure listed above now i´m happy to have a cmts for testing ...

thank you carl

cmcaldas
good deal

Glad you got it working

Log in or register to post comments