BSR1000 lost config | docsis.org

You are here

BSR1000 lost config

6 posts / 0 new
Last post
gadz
BSR1000 lost config

Hello

I have accidentally come to erase my BSR1000.

So when I boot it up it come up with the following:

VxWorks System Boot

Copyright 1984-1998 Wind River Systems, Inc.

CPU: RDN CMTS 740/750
Version: 5.4
BSP version: 1.1/0
Creation date: Jan 25 2002, 16:46:43

Press any key to stop auto-boot...
1
auto-booting...

boot device : srm
unit number : 0
processor number : 0
host name : comp01
file name : c:\riverdel\target\config\docsis\vxWorks.elf
inet on ethernet (e) : 7.1.1.7
host inet (h) : 7.1.1.88
user (u) : anonymous
ftp password (pw) : me@someco.com
flags (f) : 0x0
target name (tn) : docsis

Can't load boot file!!
0x7ec36e8 (tBoot): System Reboot Initiated, startType = 1 !
logTask: 1 log messages lost.

[RDN_CMTS Boot]:

And when i list the in tffs:

[RDN_CMTS Boot]: L

boot

NVRAM:/ - total 1 files
[RDN_CMTS Boot]:

Is there someone who know how I get it up and running again?

cmcaldas
flags are all wrong...

do you know what version software you had running before and if it's still in nvram ?
boot device should be nvram
file name should be image
and flags should 0x1000
if that doesn't work, you'll need to have the image on a tftp server connected close to the unit and can talk you through that part

~Carl

gadz
TFTP server

I have a list of the NVRAM before it went wrong:

[RDN_CMTS Boot]: L

boot
bsr1000r_120P07PRB.bin
tod
logFileCurrPos.log
default.log
startup-config
engine-boots

NVRAM:/ - total 7 files
[RDN_CMTS Boot]:

I just have a problem, in so I do not have a backup file of bsr1000r_120P07PRB.bin
I have only a appImage_20102P02PRRU.bin file

I have a tftp server beside the BSR1000 in a switch, but I can not see how I get it to download the file from tftp server??

[RDN_CMTS Boot]: ?

? - print this list
@ - boot (load and go)
p - print boot params
c - change boot params
l - load boot file
g adrs - go to adrs
d adrs[,n] - display memory
m adrs - modify memory
f adrs, nbytes, value - fill memory
t adrs, adrs, nbytes - copy memory
e - print fatal exception
q - print serialized board information
n netif - print network interface device address
B - select where to go to application Example: "B net" to load image from net host
D - load on flash application image
G - get compressed appl image from net host
E - erase tffs to allow reformatting disk after reboot
L - list the files in tffs
V - show version of the boot image
r - read Ethernet Mac address
9 - Dump Ethernet traffic statistics
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
boot device: tffs=drive,removable file name: /tffs0/vxWorks
Boot flags:
0x02 - load local system symbols
0x04 - don't autoboot
0x08 - quick autoboot (no countdown)
0x10 - bypass startup-config
0x20 - disable login security
0x40 - use bootp to get boot parameters
0x80 - use tftp to get boot image
0x100 - use proxy arp

available boot devices:Enhanced Network Devices
fei0 fei tffs
[RDN_CMTS Boot]:

I think I must use "G" but do not know what I should write more.

If you can help, it would be nice - thanks

cmcaldas
output of command

email me the output of [RDN_CMTS Boot]: p
and we can go from there

cmcaldas@gmail.com

gadz
An email on the road

An email on the road

trunky
Help please, need new appImage.

Hello everybody,
I see you have had similar problem to mine. I need appImage for BSR1000 (eurodocsis version).

If anybody has it, please send it to email address: mtrunky@emtest.sk
Thanks a lot

Log in or register to post comments