BSR 64K - Slot 8 Unknown status after re-inserting module | docsis.org

You are here

BSR 64K - Slot 8 Unknown status after re-inserting module

2 posts / 0 new
Last post
velan
BSR 64K - Slot 8 Unknown status after re-inserting module

Hi there,

I am having problem with my BSR64K slot 8. At 1st it shows "Flash" . Then when re-inserted the module it's show "UNKNOWN".

I have also attached the snapshot of the LED Indication and the parameters entered.

Please advice.

cmcaldas
force download

from config mode, force download 8
should force it to take software from the active slot 7, also run show update bypass. X's means it will not let the slot pass into a run state

Log in or register to post comments