SNMPGET OID Arris C3 Cadant CMTS | docsis.org

You are here

SNMPGET OID Arris C3 Cadant CMTS

2 posts / 0 new
Last post
Anonymous (not verified)
SNMPGET OID Arris C3 Cadant CMTS

Hi!

I can, snmp oid downstream utilization, upstream utlizilation and snr. Please help.

Thanks!

Fix

jimatarris (not verified)
ARRIS OIDs

Fix,
You can find the SNR per upstream with the standard DOCSIS MIB. Its value represents what we refer to on the CLI as Modulation Error Ratio (MER). This value is subject to change when ingress cancellation and pre-equalization are enabled for the channel.

docsIfSigQSignalNoise { iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) docsIfMib(127) docsIfMibObjects(1) docsIfBaseObjects(1) docsIfSignalQualityTable(4) docsIfSignalQualityEntry(1) 5 }
1.3.6.1.2.1.10.127.1.1.4.1

For utilization MIBs, you need to contact ARRIS and get the MIB for the specific software load you are running. There is a proprietary MIB 1.3.6.1.4.1.4115.1.4.3.1.1.1.1 which will provide upstream statistics on a per physical and logical interface level.

Hope this helps !

Be sure to check our online support site at http//ask.arrisi.com

Log in or register to post comments