You are here

Packet Cable. Feasibility of impletasion

1 post / 0 new
caos1982
Packet Cable. Feasibility of impletasion

hi all, I have been investigating how to implement network telephony hfc, and before continuing would like to consult whether it would be feasible to implement with the devices I own. They are:

CMTS

Cisco Internetwork Operating System Software
IOS (tm) EGR Software (UBR7100-IK8S-M), Version 12.3(9a)BC6, RELEASE SOFTWARE (fc1)
ROM: System Bootstrap, Version 12.0(5r)XE2, RELEASE SOFTWARE (fc1)
BOOTLDR: EGR Software (UBR7100-BOOT-M), Version 12.1(7)EC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
System image file is "disk0:ubr7100-ik8s-mz.123-9a.BC6.bin"
cisco uBR7114 (EGR) processor (revision A) with 122880K/73728K bytes of memory.
Processor board ID 31256769
R527x CPU at 225MHz, Implementation 40, Rev 10.0, 2048KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Cable Modem network interface(s)
125K bytes of non-volatile configuration memory.

47040K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).

Centos Server 5 docsis_server-3.5

Cable Modem ARRIS MODEL: TM502G

Creo que el provisioning docsis_server.3.5 no soporta packet cable.
Les agradeceria si pudieran ser tan amables de orientar si, podria implementarlos con estos hardware y software que tengo, y de no ser posible que deberia de cambiar para poder llegar al objetivo.

Muchas Gracias at todos.

docsis