bandwidth request failure status = 0 | docsis.org

You are here

bandwidth request failure status = 0

3 posts / 0 new
Last post
Anonymous (not verified)
bandwidth request failure status = 0

well the topic says it all modems on my network get that error in the modem shell (diagnostic one) SB5100 with shelled firmware are getting the error:
Bandwith request failure! Status = 0
I can not figure out why this is happening.
Any ideas?
thanks

frnkblk
Re: bandwidth request failure status = 0

the23 wrote:well the topic says it all modems on my network get that error in the modem shell (diagnostic one) SB5100 with shelled firmware are getting the error:
Bandwith request failure! Status = 0
I can not figure out why this is happening.
Any ideas?
thanks

Are you possibly trying to use DQoS on the CM and don't have it set up on the CMTS?

Frank

Anonymous (not verified)
bandwidth request failure status = 0

no,and thanks for the reply

Log in or register to post comments