New CNR configuration | docsis.org

You are here

New CNR configuration

3 posts / 0 new
Last post
gasparmenendez
New CNR configuration

Hi Folks,
I have a CNR ver. 7.0.1, installed and working fine with IP address 192.168.61.100. Besides, for testing purposes I'm using a Cisco CMTS uBR10012 configured already and one Motorola CM already registered in the CMTS / CNR. So far so good. Now I deployed a new CNR (in a new PC) ver. 7.2.3.4 with IP address 192.168.0.33 and changed the cable helper-address to 192.168.0.33 in the same CMTS but the CM isn't registering. I'm pretty sure that I did set up the CNR fine (like the working one ver. 7.0.1) but there's no possible way for the CM to register. I issued the debug commands in the CMTS to see where the problem is but I'm getting nothing, just:
VicenteguerreroD3#
SLOT 8/1: Jan 2 18:29:17.669: %UBR10000-5-UNREGSIDTIMEOUT: CMTS deleted unregistered Cable Modem 3060.2371.xxxx
VicenteguerreroD3#
Jan 2 18:30:34.848: Cable8/1/0 UCID 1 CM 3060.2371.xxxx state 8 ack 1 time 11842 init time 11841
VicenteguerreroD3#
Can anybody help me please???
thanks in advance. BR
Happy New Year!!!

MESCANO1
Help

You can write me at my email misael_software@hotmail.com I can give you a hand. !!
write me maybe there is a problem in the cfg of ubr cmts or in the dhcp of cnr

mbowe
what does show cable modem

what does show cable modem 3060.2371.xxxx say? init(d) ?

Make sure you have got working routing between the CMTS and new DHCP server
Can the CMTS ping DHCP server (192.168.0.33) ?
Can the DHCP server ping the CMTS ?

Log in or register to post comments