Docsis 3.1 | docsis.org

You are here

Docsis 3.1

14 posts / 0 new
Last post
OldDocsisGuy
Docsis 3.1

Hello,
I'm experimenting with Docsis 3.1 on a Cisco cbr8 (downstream only at this time). I have a downstream setup and am awaiting a couple of modems to arrive to test my setup. Does anyone know if there is anything specific that needs to be done in the config file for the modem to help out and take advantage of the new carriers?

ODG

mbowe
No, you don't need anything

No, you don't need anything special

OldDocsisGuy
Thank you sir!

Thank you sir!
I'm excited to try this out. My modems will be here this week.
ODG

networkvisionary
I'm also experimenting with

I'm also working with some D3.1 configurations on CBR8. We have a Technicolor and a Ubee device but waiting on some more from vendors to get things moving in lab. Hopefully there will be more devices available soon from various vendors

OldDocsisGuy
I just recieved some Arris

I just recieved some Arris modems (8200a), but haven't connected them yet, I just finished delivering 2 more cbr's to a couple of our remote locations.
Hopefully I will get to play a bit later.

networkvisionary
I'm expecting to get some of

I'm expecting to get some of those 8200 devices in next week. This week I got Netgear CM1000, Ubee UBC1301, and Technicolor TC4400. Got them all provisioned and connected to the CBR8. Got the preliminary configs done and the devices are online locked on the OFDM carrier. Interested to see what kind of performance I get.

mbowe
I have been testing a TC4400

I have been testing a TC4400 with cBR8

Bonding group : 32 DOCSIS SC-QAM plus 1 x OFDM

Seemed to work OK with this settings :

max-ofdm-spectrum 192000000, ofdm channel-profile 2 width 192000000

But it was having packet loss problems (pinging the modem from CMTS) with these settings :
max-ofdm-spectrum 192000000, ofdm channel-profile 2 width 96000000
and
max-ofdm-spectrum 96000000, ofdm channel-profile 2 width 96000000

I'd be very interested to see if you have any similar problems

SW_REV: SR70.12.20; MODEL: TC4400-GEN

networkvisionary
Thanks for the heads up.

Thanks for the heads up. Running the same firmware. Interesting the more narrow width caused issues. Will try to reproduce here at some point.

EOL-tbowser
The D3.1 config documents

The D3.1 config documents from Cisco aren't exactly enlightening on how to set this up; for instance, their example in the current "Full Book" won't complete as given (errors out with the 'plc 663000000' statement)

Do you have a sample custom 'controller Integrated-Cable x/x/x' with OFDM, or are you using the IOS defaults?

Enquiring minds with a lab unit would love to try it out.

Thanks for looking

EOL-tbowser
Yikes!

I decided to teach myself via the IOS "?" route, and got an OFDM channel running using the defaults in 03.18.01a.SP. I now have to figure out what this thing is doing, since Web speed tests are unable to give me a straight answer. :-)

A 96mhz wide channel, using the #2 OFDM channel profile, so far has returned 500mb+ downloads on it's own, using a single SC-QAM as the primary. Tying this to a 24-channel SC-QAM bonding group doesn't seem to bother the Arris CM8200A I'm using as the guinea pig, but I don't see increases in the downstream rate. Could be backhaul, could be the laptop, could be the test site (DSLReports.com and their HTML5-based test).

CMTS work just got 'fun' again.

ScratOS
Standard D1.1 config will be

Standard D1.1 config will be perfect. Rest is config on CBr8 . Work quite well.

fschlums
Very interesting to read what

Very interesting to read what you already did with D3.1.
What you think, stable enough for a rollout to customers?
Anybody of you able to compare D31 DS service with a Casa CMTS with DS8x192 linecards?
I would prefer US D31 service. But I think I have to wait some more months. Any rumors when Cisco starts supporting US D31?

ScratOS
It's stable for rollout -

It's stable for rollout - question for cost of CM there is still issue with that.
D3.1 will consume bandwidth from D3.0 and D3.1 so you can start with smaller channel and still give 1Gbit to customer.
But to be honest - for now it's still better to pump D3.0 into the platform 32DS etc..
US DS3.1 - modems are the issue. Cisco plan is to support this end Q1/Q2 this year.

Anonymous (not verified)
Wondering what meters

Wondering what meters everyone is using for D3.1. I have Trilithic 1G DSP... however I understand from Trilithic the throughput testing for the cable modem portion of the meter is not able to support D3.1 throughput and is in process to get an update to support that. Going to look into getting something else for the meantime.

Log in or register to post comments