Password for diag on cmts Casa c2200 | docsis.org

You are here

Password for diag on cmts Casa c2200

13 posts / 0 new
Last post
meonacist
Password for diag on cmts Casa c2200

Hi, all! Can somebody help for me....?
We buy aka "second hand" casa c2200 many years ago...

Now we have trouble with installed modules...examle:

casa#show system
Product: C2200, Module: SMM
Major rev 1, Minor rev 1
serial_no = SV03B89S0013
CFE version 2.1.3
System Time: Thu Aug 11 11:22:22 UTC 2016
System Uptime: 0 d, 0 h, 58 m, 21 s
128MHz T1 Clock

Module 0 QAM NotReady

Module 1 UPS NotReady

Module 2 UPS NotReady

Module 3 UPS NotReady
.....

Any manipulation with module... can't alive them...

I found diag mode, but i don't know password....(not default - casa and not root password)

Any body have any ideas?

volej
Hello, password for diag mode

Hello, password for diag mode is "casadiag". Hope that helps...

meonacist
Thanx!!

Big thanx!!!
But I still can not run the module (

cmcaldas
software?

can you post a show version or show boot ?
it shows the hardware rev info, but not what software it's running. possible it may have been deleted since you purchased it second hand. have you reached out to who sold it to you?

~Carl

meonacist
show version & boot

casa(config)#show version
Running Image: SMM Rel 5.2, Ver 29, Tue Jul 7 16:18:47 EDT 2009, (moly)
Boot device: flash1
flash1: SMM Rel 5.2, Ver 29, Tue Jul 7 16:20:21 EDT 2009, ( moly)
flash2: SMM Rel 4.0, Ver 40, Thu Jun 11 14:41:09 EDT 2009, ( maggie)
CFE Boot: Major 2, Minor 1, Build 3
casa(config)#show boot
System boot device is: flash1

it work, when we buy... about 5 years ago we turn off this. And now turn on it and see this picture...

volej
software

Meonacist, give me your email address. I will send you the newest firmware, maybe it will help...

meonacist
email

meonacist@inbox.ru

big thx, but update not help....

dchard
C2200 firmware

Hi,

Do you happen to have the newest firmware for Casa C2200 too?

We have a single piece just for test purposes and software is at least 5 years old.

Please send it to metro4 at freemail.hu

Thanks!

Dchard

mcaffee
Firmware

Hallo,

Can you also send me the latest release? Many thanks, I have a lot of problems with the RCC-Templates.

sambaldap at gmail dot com

Thanks,

sangle
Volej

Volej
would you please email me the firmware for C2200 as well
the one i have right now is quite old w/ firmware version: rel 5.2, ver 39
my email: leminhsangdlu@gmail.com
thanks in advance.

Ivan
The CASA latest release firmware

Hi Volej,

Can you also send me the latest release? I have a lot of problems with the RCC-Templates & malformed packet.

My email is ivan.liao@gmail.com

Thanks a lot,

cutandpaste
Is module working?

So does your system detect the card?

Rosta (not verified)
CASA C2200 firmware

Hi
Please also send the latest C2200 Firmware.
My email is "emailmaster@tvrdonice.cz"
thank you very much

Log in or register to post comments